JUKI贴片机错误代码集合.pdf - 第138页

E512000 “ Axi s Alarm |(Detail Error is unknown) ” “ 坐标轴 警报 | ( 不能查出详细错误 ) ” E512111 “ XY Axis detect Servo Driv er Alarm|(OverCurrent) ” “ XY 轴移动时伺服驱动警报 |( 过电流 ) ” E512112 “ XY Axis detect Servo Dr iver Alarm|(OverLoad)…

100%1 / 464
“打开程序管理命令失败。”
[Cause]
The software did not get started properly.
[Treatment]
Please turn off the power supply of the machine and reboot it.
E511005 “Failed in the transmission of the response to the application-manager”
“往程序管理发送应答失败。”
[Cause]
The software did not get started properly.
[Treatment]
Please turn off the power supply of the machine and reboot it.
E511006 “Failed in the reception of the command from the application-manager”
“接收程序管理的命令失败。
[Cause]
The software did not get started properly.
[Treatment]
Please turn off the power supply of the machine and reboot it.
E511007 “Failed in the opening of the command of the scheduler”
“打开调度程序命令失败。”
[Cause]
The software did not get started properly.
[Treatment]
Please turn off the power supply of the machine and reboot it.
E511008 “Failed in the transmission of the response to the scheduler”
“往调度程序发送应答失败。”
[Cause]
The software did not get started properly.
[Treatment]
Please turn off the power supply of the machine and reboot it.
E511009 “Failed in the reception of the command from the scheduler”
“接收调度程序的命令失败。”
[Cause]
The software did not get started properly.
[Treatment]
Please turn off the power supply of the machine and reboot it.
E512000 “ Axis Alarm |(Detail Error is unknown)”
“坐标轴警报 |(不能查出详细错误)”
E512111 “XY Axis detect Servo Driver Alarm|(OverCurrent)”
“XY 轴移动时伺服驱动警报|(过电流)”
E512112 “XY Axis detect Servo Driver Alarm|(OverLoad)”
“XY 轴移动时伺服驱动警报|(过负荷)”
E512113 “XY Axis detect Servo Driver Alarm|(OverVoltage)”
“XY 轴移动时伺服驱动警报|(过电压)”
E512114 “XY Axis detect Servo Driver Alarm|(Drive Power Source Error or Servo Power OFF)”
“XY 轴移动时伺服驱动警报|(驱动电源异常或伺服电源被关闭)”
E512115 “XY Axis detect Servo Driver Alarm|(OverHeat Error)”
“XY 轴移动时伺服驱动警报|(过热错误)”
E512116 “XY Axis detect Servo Driver Alarm|(Encoder Error or Magnet Scale Error)”
“XY 轴移动时伺服驱动警报|(译码器异常或 Magnet 刻度出错)”
E512117 “XY Axis detect Servo Driver Alarm|(Commutation Error)”
“XY 轴移动时伺服驱动警报|(通讯异常)”
E512118 “XY Axis detect Limit Senser”
“XY 轴移动时界限错误”
E512119 “XY Axis detect Cordinates outof Limit Range”
“XY 轴移动前指定的坐标，超过移动范围。”
E512211 “XR Axis detect Servo Driver Alarm|(OverCurrent)”
“XR 轴移动时伺服驱动警报|(过电流)”
E512212 “XR Axis detect Servo Driver Alarm|(OverLoad)”
“XR 轴移动时伺服驱动警报|(过负荷)”
E512213 “XR Axis detect Servo Driver Alarm|(OverVoltage)”
“XR 轴移动时伺服驱动警报|(过电压)”
E512214 “XR Axis detect Servo Driver Alarm|(Drive Power Source Error or Servo Power OFF)”
“XR 轴移动时伺服驱动警报|(驱动电源异常或伺服电源被关闭)”
E512215 “XR Axis detect Servo Driver Alarm|(OverHeat Error)”
“XR 轴移动时伺服驱动警报|(过热错误)”
E512216 “XR Axis detect Servo Driver Alarm|(Encoder Error or Magnet Scale Error)”
“XR 轴移动时伺服驱动警报|(译码器异常或 Magnet 刻度错误)”
E512217 “XR Axis detect Servo Driver Alarm|(Commutation Error)”
“XR 轴移动时伺服驱动警报|(通讯异常)”
E512218 “XR Axis detect Limit Senser”
“XR 轴移动时界限错误”
E512219 “XR Axis detect Cordinates outof Limit Range”
“XR 轴移动前指定的坐标，超过移动范围。”
E512311 “Y Axis(YL)detect Servo Driver Alarm|(OverCurrent)”
“Y 轴(YL)移动时伺服驱动警报|(过电流)”
E512312 “Y Axis(YL)detect Servo Driver Alarm|(OverLoad)”
“Y 轴(YL)移动时伺服驱动警报|(过负荷)”
E512313 “Y Axis(YL)detect Servo Driver Alarm|(OverVoltage)”
“Y 轴(YL)移动时伺服驱动警报|(过电压)”
E512314 “Y Axis(YL)detect Servo Driver Alarm|(Drive Power Source Error or Servo Power OFF)”
“Y 轴(YL)移动时伺服驱动警报|(驱动电源异常或伺服电源被关闭)”
E512315 “Y Axis(YL)detect Servo Driver Alarm|(OverHeat Error)”
“Y 轴(YL)移动时伺服驱动警报|(过热错误)”
E512316 “Y Axis(YL)detect Servo Driver Alarm|(Encoder Error or Magnet Scale Error)”
“Y 轴(YL)移动时伺服驱动警报|(译码器异常或 Magnet 刻度错误)”
E512317 “Y Axis(YL)detect Servo Driver Alarm|(Commutation Error)”
“Y 轴(YL)移动时伺服驱动警报|(通讯异常)”
E512318 “Y Axis(YL)detect Limit Senser”
“Y 轴(YL)移动时界限错误”
E512319 “Y Axis(YL)detect Cordinates outof Limit Range”
“Y 轴(YL)移动前指定的坐标，超过移动范围。”
E512411 “YR Axis detect Servo Driver Alarm|(OverCurrent)”
“YR 轴移动时伺服驱动警报|(过电流)”
E512412 “YR Axis detect Servo Driver Alarm|(OverLoad)”
“YR 轴移动时伺服驱动警报|(过负荷)”