JUKI贴片机错误代码集合.pdf - 第182页

E604132 “ Axi s Driver:| T1-axis failed motion start .” “ T1 轴错误 : 启动失败。 ” E604232 “ Axi s Driver:| T2-axis failed motion start .” “ T2 轴错误 : 启动失败。 ” E604332 “ Axi s Driver:| T3-axis failed motion start .” “ T3 轴错误 : 启动失…

100%1 / 464
E604230 “Axis Driver:| XMP error occurred on T2-axis.”
“ T2 轴错误: XMP 错误。”
E604330 “Axis Driver:| XMP error occurred on T3-axis.”
“ T3 轴错误: XMP 错误。”
E604430 “Axis Driver:| XMP error occurred on T4-axis.”
“ T4 轴错误: XMP 错误。”
E604530 “Axis Driver:| XMP error occurred on RT1-axis.”
“RT1 轴错误: XMP 错误。”
E604630 “Axis Driver:| XMP error occurred on RT2-axis.”
“RT2 轴错误: XMP 错误。”
E604730 “Axis Driver:| XMP error occurred on RT3-axis.”
“RT3 轴错误: XMP 错误。”
E604830 “Axis Driver:| XMP error occurred on RT4-axis.”
“RT4 轴错误: XMP 错误。”
E604131 “Axis Driver:| T1-axis status error.”
“ T1 轴错误: 状态错误。”
E604231 “Axis Driver:| T2-axis status error.”
“ T2 轴错误: 状态错误。”
E604331 “Axis Driver:| T3-axis status error.”
“ T3 轴错误: 状态错误。”
E604431 “Axis Driver:| T4-axis status error.”
“ T4 轴错误: 状态错误。”
E604531 “Axis Driver:| RT1-axis status error.”
“RT1 轴错误: 状态错误。”
E604631 “Axis Driver:| RT2-axis status error.”
“RT2 轴错误: 状态错误。”
E604731 “Axis Driver:| RT3-axis status error.”
“RT3 轴错误: 状态错误。”
E604831 “Axis Driver:| RT4-axis status error.”
“RT4 轴错误: 状态错误。”
E604132 “Axis Driver:| T1-axis failed motion start.”
“ T1 轴错误: 启动失败。”
E604232 “Axis Driver:| T2-axis failed motion start.”
“ T2 轴错误: 启动失败。”
E604332 “Axis Driver:| T3-axis failed motion start.”
“ T3 轴错误: 启动失败。”
E604432 “Axis Driver:| T4-axis failed motion start.”
“ T4 轴错误: 启动失败。”
E604532 “Axis Driver:| RT1-axis failed motion start.”
“RT1 轴错误: 启动失败。”
E604632 “Axis Driver:| RT2-axis failed motion start.”
“RT2 轴错误: 启动失败。”
E604732 “Axis Driver:| RT3-axis failed motion start.”
“RT3 轴错误: 启动失败。”
E604832 “Axis Driver:| RT4-axis failed motion start.”
“RT4 轴错误: 启动失败。”
E604133 “Axis Driver:| T1-axis failed motion stop.”
“ T1 轴错误: 停止失败。”
E604233 “Axis Driver:| T2-axis failed motion stop.”
“ T2 轴错误: 停止失败。”
E604333 “Axis Driver:| T3-axis failed motion stop.”
“ T3 轴错误: 停止失败。”
E604433 “Axis Driver:| T4-axis failed motion stop.”
“ T4 轴错误: 停止失败。”
E604533 “Axis Driver:| RT1-axis failed motion stop.”
“RT1 轴错误: 停止失败。”
E604633 “Axis Driver:| RT2-axis failed motion stop.”
“RT2 轴错误: 停止失败。”
E604733 “Axis Driver:| RT3-axis failed motion stop.”
“RT3 轴错误: 停止失败。”
E604833 “Axis Driver:| RT4-axis failed motion stop.”
“RT4 轴错误: 停止失败。”
E604136 “Axis Driver:| T1-axis. The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“ T1 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E604236 “Axis Driver:| T2-axis. The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“ T2 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E604336 “Axis Driver:| T3-axis.The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“ T3 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E604436 “Axis Driver:| T4-axis. The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“ T4 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E604536 “Axis Driver:| RT1-axis. The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“RT1 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E604636 “Axis Driver:| RT2-axis.The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“RT2 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E604736 “Axis Driver:| RT3-axis. The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“RT3 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E604836 “Axis Driver:| RT4-axis. The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“RT4 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E604138 “Axis Driver:| T1-axis The position error exceeded the limit.”
“ T1 轴错误: 位置偏移量超过界限。”
E604238 “Axis Driver:| T2-axis The position error exceeded the limit.”
“ T2 轴错误: 位置偏移量超过界限。”
E604338 “Axis Driver:| T3-axis The position error exceeded the limit.”
“ T3 轴错误: 位置偏移量超过界限。”