JUKI贴片机错误代码集合.pdf - 第386页
E694001 “ A copl anarity judgemennt error .” “ 共面检 测错误。 ” E694002 “ A copl anarity centering position error .” “ 共面检 测时的端子位置偏移错误。 ” E694003 “ A l ead count error .” “ 引脚数 错误。 ” E694004 “ A coli nearity judgemennt error .…
E693018 “A system error occurred.|The machine type is illegal.”
“发生系统错误。|机器类型错误。”
E693019 “The abnormalities of the position sensor of illumination were detected at the time of the
illumination position change to VCS(R).|The sensor of both by the side of a standard and an option
is turned on.”
“ 照明位置切换到VCS（R）时，照明位置传感器发现异常。|标准和选项两侧的传感器都
是ON。”
E693020 “The abnormalities of the position sensor of illumination were detected at the time of the
illumination position change to VCS(L).|The sensor of both by the side of a standard and an option
is turned on.”
“ 照明位置切换到VCS（L）时，照明位置传感器发现异常。|标准和选项两侧的传感器都
是ON。”
E693021 “The abnormalities of the position sensor of illumination were detected at the time of the
illumination position change to VCS(R).|The sensor of both by the side of a standard and an option
is turned off.”
“ 照明位置切换到VCS（R）时，照明位置传感器发现异常。|标准和选项两侧的传感器都
是OFF。”
E693022 “The abnormalities of the position sensor of illumination were detected at the time of the
illumination position change to VCS(L).|The sensor of both by the side of a standard and an option
is turned off.”
“ 照明位置切换到VCS（L）时，照明位置传感器发现异常。|标准和选项两侧的传感器都
是OFF。”
E693023 “The position of illumination does not change to standard VCS(R).|The position sensor by the side
of a standard does not turn on.”
“照明位置切换不了标准VCS（R）。|标准侧的位置传感器不是ON。”
E693024 “The position of illumination does not change to option VCS(R).|The position sensor by the side of
a option does not turn on.”
“照明位置切换不了选项VCS（R）。|选项侧的位置传感器不是ON。”
E693025 “The position of illumination does not change to standard VCS (L).|The position sensor by the side
of a standard does not turn on.”
“照明位置切换不了标准VCS（L）。|标准侧的位置传感器不是ON。”
E693026 “The position of illumination does not change to option VCS (L).|The position sensor by the side of
a option does not turn on.”
“照明位置切换不了选项VCS（L）。|选项侧的位置传感器不是ON。”
E694001 “A coplanarity judgemennt error.”
“ 共面检测错误。”
E694002 “A coplanarity centering position error.”
“ 共面检测时的端子位置偏移错误。”
E694003 “A lead count error.”
“ 引脚数错误。”
E694004 “A colinearity judgemennt error.”
“ 平行性判断错误。”
E694005 “A coplanarity measurement error.”
“ 共面检测时测量错误。”
E694006 “The measurement plane is too low.”
“ 共面测量高度过低。”
E694007 “The measurement plane is too high.”
“ 共面测量高度过高。”
E694011 “A coplanarity unit error.”
“ 共面测量单元错误。”
E694012 “A illegal data or illegal operation.”
“ 违规数据或违规操作引起的错误。”
E694013 “A coplanarity adjust error.”
“ 共面校准错误。”
E694014 “A time-out or other error.”
“ 超时或其它错误。”
E694015 “A hardware error of coplanarity controler.”
“ 控制共面的硬件出错。”
E694016 “A measurement software error.”
“ 测量软件有问题。”
E694017 “A lasor diode is abnormal.”
“ 激光超时错误。”
E694018 “A cable connection error.”
“ 传感器电缆连接异常。”
E694019 “The motor revolution is abnormal.”
“ 马达旋转次数异常。”
E694020 “A memory of sencer is abnormal.”
“ 传感器内存异常。”
E694021 “A initialize error of coplanarity unit.”
“ 初始化共面单元时发生错误。”
E694022 “An axis error of coplanarity measurement.”
“ 共面测量时轴发生错误。”
E694030 “The component type can not be measured.”
“ 指定的组件类型错误。”
E694031 “The component size is too large.”
“ 组件尺寸过大，超过测量范围。”
E694032 “The component size is out of range.”
“ 组件尺寸超过测量范围。”
E694033 “The component height is too high.”
“ 组件高度过高，超过测量范围。”
E694034 “The measurement mode is not correct or the component can not be measured.”
“ 指定的测量方法有问题或指定组件类型错误。”
E694035 “The electrode can not be measured.”
“ 所指定的电极不能测量。”
E694036 “A coplanarity sensor is unused.”
未用共面检测
E695012 “Parameter for the head is not correct.”
“HEAD参数不正确。”
E695013 “The bus error occurred by the laser board(L).|Please check a laser board.”
“激光板(L)总线发生错误。|请检查一下激光板。”
E695014 “The bus error occurred by the laser board(R).|Please check a laser board.”
“激光板(R)总线发生错误。|请检查一下激光板。”
E695015 “The bus error occurred by the laser board(L).”
“激光板(L)总线发生错误。”