JUKI贴片机错误代码集合.pdf - 第418页
preset. [Deal] Assign the stations with another absorption point and set lane s. E3022 Tray hol der registrati on is exceeded. " 托盘固定器注册过度。 " [Cause] Appears if any number of holders exceedi ng the maximum for …
Appears if the mount position deviates from the permissible range of the PWB or circuit. On the left
of a mounting data with deviated position, "*" (out-of-range) mark is added.
[Deal]
Specify the data within the permissible range of the PWB or circuit.
E3016 IC mark limits are exceeded.
"IC 标记限制超出。"
[Cause]
Appears if a value deviates from the permissible range indicated by the IC marks is specified for the
mounting data.
[Deal]
Specify the data within the permissible range.
E3017 Mark data are full.
"标记数据已满。"
[Cause]
Appears if mark data exceeding the maximum number (50 sets) is created for the mounting data.
[Deal]
Decrease the number of mark data to 50 sets or less.
E3018 Component data are full.
"组件数据已满。"
[Cause]
Appears if part names exceeding the maximum number is specified for the mounting data.
[Deal]
Decrease the number of part names (part data) to the maximum or less.
E3019 “Component name cannot be found. “
"未找到组件名称。"
E3020 Package has already been assigned.
"已指定包装。"
[Cause]
Appears if any position already allocated is claimed for the absorption data.
Message
E3021 There is no open lane.
"没有开放的信道。"
[Cause]
Appears if any number is specified for an absorption point where the stick package type has been
chosen for the part data, stations has been specified with the absorption data, and all lanes have been
preset.
[Deal]
Assign the stations with another absorption point and set lanes.
E3022 Tray holder registration is exceeded.
"托盘固定器注册过度。"
[Cause]
Appears if any number of holders exceeding the maximum for the absorption data.
[Deal]
Decrease the number of holders to the maximum or less.
E3023 “Lane number does not match type. “
"信道数量和类型不匹配。"
E3024 “Type cannot be changed. “
"不能改变类型。"
E3025 “Cannot be assigned to type 1. “
"不能指定为类型 1"
E3026 “Lane cannot be assigned. “
"信道不能被指定。"
E3027 “Lane is already assigned. “
"信道已经被指定。"
E3028 “Number of leads is in error. “
"引脚数量错误。"
E3029 umber missing is in error.
"缺省数量错误。"
[Cause]
Appears if any invalid value (exceeding the number of leads) is specified for the number of lead lacks
for the vision data editing.
[Deal]
Check the entered value.
E3030 “Please input type. “
"请输入类型。"
E3031 There is an error in the number of the first missing component.
"在第一个缺省组件处出现一个错误。
."
[Cause]
Appears if any invalid value (exceeding the number of leads) is specified for the first lack number
during vision data editing.
[Deal]
Check the entered number.
E3032 “Limits are exceeded. “
"限制超出。"
E3033 Character searched for cannot be found.
"找不到字符。"
[Cause]
Appears if the data with the specified conditions was not found during a search process.
[Deal]
Check the search conditions.
E3034 Mounting position of component in program duplicates position of component already mounted.
"在程序中组件的贴装位置复制组件的位置已经装备。"
[Cause]
Appears if the claimed position has been allocated for placement information preset during the MSL
setup.
[Deal]
Select another position.
E3035 “Another component is using the picking position of this previously mounted component. “
"贴装组件的预定选取位置正被另外一个组件使用。"
E3036 "Placement part already resides at the intended position," appears if the claimed position has been
allocated for placement information preset during the MSL setup.
"已经被预先供给的组件占用。"
[Deal]
Select another position.
E3037 Data base file cannot be found.
"没有找到数据库文件。"
[Cause]
Appears if no database resides on the directory specified during the MSL setup..
[Deal]
Make sure that the directory specified during the MSL setup contains any database.
E3038 “Database file is being used by another EXE, so it could not be read in. “
"数据库文件被另一个 EXE 文件使用，不能读入。"