JUKI贴片机错误代码集合.pdf - 第290页
Please examine the Component dat a in the production program. Please examine the Vision da ta in the production program. Please examine the Component d ata (Vacuum value without compone nt) in the prod uction program. Pl…
“组件识别错误:只有 1-3 个引脚”
[Cause]
The leads are too few.
The specified lead missing is wrong.
The component's lead pitch is different.
Picking posture is not correct.
The picked component is different from a component in the Component data.
The light is either too bright or too dark.
The light is dirty.
The camera lens is dirty.
The light cable almost gets cut off.
The brilliancy of LED is varying.
[Treatment]
Please examine the number of leads in the production program.
Please examine the lead missing in the production program.
Please examine the lead pitch in the production program.
Please examine the Pick data in the production program.
Please examine the light parameter in the production program.
Please adjust the light parameter in the production program.
Please clean the light.
Please clean the camera lens.
Please change the light cables.
Please re-adjust the electric currency of the light.
Please change the lights and re-adjust the electric currency of the new light.
Please change the light boards and re-adjust the electric currency of the new board.
E631027 “ViRecog Error: Failed to find lead(s). Please examine Pick position”
“组件识别错误:不能检测组件框架”
[Cause]
Picking posture is not correct.
The picked component is different from a component in the Component data.
The component is not being picked.
The light is either too bright or too dark.
The light is dirty.
The camera lens is dirty.
The light cable almost gets cut off.
The brilliancy of LED is varying.
[Treatment]
Please examine the Pick data in the production program.
Please examine the Component data in the production program.
Please examine the Vision data in the production program.
Please examine the Component data (Vacuum value without component) in the production program.
Please examine the light parameter in the production program.
Please adjust the light parameter in the production program.
Please clean the light.
Please clean the camera lens.
Please change the light cables.
Please re-adjust the electric currency of the light.
Please change the lights and re-adjust the electric currency of the new light.
Please change the light boards and re-adjust the electric currency of the new board.
E631028 “ViRecog Error: Mis-recognized the fine pitch lead. Please examine Light conditions”
“组件识别错误:正常间距引脚识别错误”
[Cause]
The light is either too bright or too dark.
The light is dirty.
The camera lens is dirty.
The light cable almost gets cut off.
The brilliancy of LED is varying.
[Treatment]
Please examine the light parameter in the production program.
Please adjust the light parameter in the production program.
Please clean the light.
Please clean the camera lens.
Please change the light cables.
Please re-adjust the electric currency of the light.
Please change the lights and re-adjust the electric currency of the new light.
Please change the light boards and re-adjust the electric currency of the new board.
E631029 “ Lead component recognition error: Detected lead count is fewer than specified (extension lead
connector).”
“组件识别错误:引脚数少于设置数(扩张引脚连接器)”
E631030 “ Lead component recognition error: Few leads are detected (extension lead connector).”
“组件识别错误:没有发现引脚(扩张引脚连接器)”
E631031 “ Lead component recognition error: Corner detection error (QFN)”
“组件识别错误:检测出组件角度异常(QFN)”
E631032 “ Lead component recognition error: Wrong base style (QFN)”
“组件识别错误:基本类型不同的组件(QFN)”
E631033 “ Lead component recognition error: Corner brightness error (QFN)”
“组件识别错误:组件拐角处亮度异常(QFN)”
E631040 “ Outermost balls recognition error: Cannot detect all balls (uppermost row) (detected less than 1/3
of existing balls).”
“外周球识别错误:不能检测球(上边)(检测对象不到 1/3)”
E631041 “ Outermost balls recognition error: Cannot detect all balls (lowermost row) (detected less than 1/3
of existing balls).”
“外周球识别错误:不能检测球(下边)(检测对象不到 1/3)”
E631042 “ Outermost balls recognition error: Cannot detect all balls (leftmost column) (detected less than 1/3
of existing balls).”
“外周球识别错误:不能检测球(左边)(检测对象不到 1/3)”
E631043 “ Outermost balls recognition error: Cannot detect all balls (rightmost column) (detected less than
1/3 of existing balls).”
“外周球识别错误:不能检测球(右边)(检测对象不到 1/3)”
E631044 “ Outermost balls recognition error: Uppermost/Lowermost ball rows are not paralleled (tilted +/-3
degrees or more).”
“外周球识别错误:球上下边倾斜度大于 3 度”
E631045 “ Outermost balls recognition error: Leftmost/Rightmost ball columns are not paralleled (tilted +/-3
degrees or more).”
“外周球识别错误:球左右边倾斜度大于 3 度”
E631046 “ Outermost balls recognition error: Distance between uppermost/lowermost ball rows is too large
(half-pitch larger).”
“外周球识别错误:球上下边距离大于半个间距”
E631047 “ Outermost balls recognition error: Distance between leftmost/rightmost ball columns is too large
(half-pitch larger).”
“外周球识别错误:球左右边距离大于半个间距”
E631060 “ All Balls recognition error: Ball pitch error.”
“所有球识别错误:球间距错误”
E631061 “ All Balls recognition error: Cannot detect balls, or the image is blurred or too dark.”
“所有球识别错误:因太暗，不能识别”