JUKI贴片机错误代码集合.pdf - 第421页
Appears if cutting is selected for each screen. E3047 “ Optimization failed. “ " 优化失败。 " E3048 “ Optimization was in terrupted. “ " 优化被终止。 " E3049 “ Mismatch occured between line c onfigurat ion and p…
E3039 “Optimization was not performed. “
"没有执行优化。"
E3040 Number of circuits on one PWB exceeds limit (400).
"在一块板上的 电路数量超过限制(1200)。"
[Cause]
Appears if with more than 100 circuit-divisions (n x n) is specified in the multi-chamfer matrix for the
base construction of the PWB data.
[Deal]
Decrease the circuit divisions (n x n) to 100 or less.
E3041 Exterior shape of circuit PWB or circuit has not been set.
"电路基板或电路的外部形状未设置。"
[Cause]
Appears if a bad mark is entered with the PWB or circuit outside dimension not defined for the PWB
data.
[Deal]
Before entering a bad mark, specify the PWB or circuit outside dimension.
E3042 Pick data are full.
"拾取数据已满。"
[Cause]
Appears if absorption data exceeding the maximum is specified.
[Deal]
Decrease the absorption data to the maximum or less.
E3043 There are incomplete pick data for this previously mounted component.
"预定的贴片组件上有不完全选取数据。"
[Cause]
Appears if any placement information incomplete placement data is loaded for the mounting data.
[Deal]
Complete the relative placement information during the MSL setup.
E3044 “Production EXE reservation for this file is in progress. “
"正在进行文件产生 EXE."
E3045 “Optimization is completed. “
"优化已经完成。"
W3046 Deletion will be performed . Is this OK?
"执行删除，确定吗？"
[Explanation]
Appears if cutting is selected for each screen.
E3047 “Optimization failed. “
"优化失败。"
E3048 “Optimization was interrupted. “
"优化被终止。"
E3049 “Mismatch occured between line configuration and program data. “
"在线外形和程序数据之间不匹配。"
E3050 Program will be terminated.
"将退出编辑程序。"
[Explanation]
Appears if the program editing forced an abnormal ending after starting.
W3051 Dispenser X blow point is out of PWB.
"X 打击点在基板的外部。"
[Explanation]
Appears if the start position for dummy punching deviates from the PWB.
W3052 Dispenser Y blow point is out of PWB.
"Y 打击点在基板的外部"
[Explanation]
Appears if the start position for dummy punching deviates from the PWB.
W3053 Both X and Y dispenser blow count is set to 0, dispenser blow will be disabled. Are you sure?
"X 和 Y 分配的打击数都设置成 0，分配打击将取消，确定吗？"
[Explanation]
Appears if 0 is specified for both the numbers of dummy punching operations, X and Y, and the OK
button is pressed.
W3055 Data is incomplete. Would you like to save?
"数据不完整，要保存吗？"
[Explanation]
Appears if saving incomplete data is tried.
E3056 Same component name is already in component data.
"在组件数据中已有同样的组件名。"
[Cause]
Appears if the name of an existing part within the program editing is requested when retrieving a
database listing.
[Deal]
Retrieve a database listing call for a name of a part not present on the program editing.
E3057 “This component name <%s> already exists. “
"该组件名已存在。"
E3058 “This adhesive patten name <%s> already exists. “
"该粘性图案名 <%s>已经存在。"
E3059 “Adhesive database file cannot be found. “
"找不到粘性数据库文件。"
W3060 “The database structure has been changed. Unless this file is updated. It cannot be handled in this
version. Launch Database, dialogbox will show how to update the database structure. “
"数据库结构已经被改变，文件将更新。在该版本中不能处理，激活数据库，对话框将显
示如何更新数据库结构。"
W3501 “A file already exists.Shall it be overwritten? “
"文件已经存在，要覆盖吗？"
W3502 Data being created will be lost. Is this OK?
"创建的数据将丢失，确定吗?"
[Explanation]
Appears if "New" or "Open" is selected from the File menu when editing data.
W3503 When station is changed, component data and pick data will be deleted. Is this OK?
"当位置被改变，组件数据和挑选数据将被删除，确定吗？"
[Explanation]
Appears if station specification is changed in the mounting data.
W3504 There are no data to be saved.
"没有要保存的数据。"
[Explanation]
Appears if "Save" is selected without editing data.
W3505 “Set tray component to one.Is this OK? “
"设置盘组件，确定？
"
W3506 “<%s> will be registered.Is this OK? “
"<%s>将被注册，确定吗？"
W3507 “Registration of <%s> is in progress. “
"注册<%s>正在进行。"
W3508 <%s> will be called. Is this OK?