JUKI贴片机错误代码集合.pdf - 第300页
E633001 “ LSC Primitive Error: Command Syntax Error .” “ LSC 错 误：命令语法错误 “ E633002 “ LSC Primitive Error:Illegal Command .” “ LSC 错 误：执行未定义的命令 “ E633003 “ LSC Primitive Error:Co mmand Parameter Error .” “ LSC 错 误：命令参数错误 “…
E631502 “ Component matching teaching error: Other Failures”
“ 组件示教结果代码:取其它特征时失败 “
E631999 “The recognition error which cannot be assigned has occurred.”
“ 发生不能分配的识别错误 “
E632000 “LSC Command Handshake Error.”
“ 通讯错误: 连接 LSC 命令错误 “
E632001 “LSC Responce Handshake Error.”
“ 通讯错误: LSC 响应错误 “
E632002 “LSC Undefined Command Request.”
“ 使用未定义的 LSC 命令 “
E632003 “LSC Image Caputure Timeout.”
“ 取得 LSC 图像数据时发生超时 “
E632004 “LSC Operation Error(No Image).”
“ LSC 操作失败(没有图像) “
E632005 “LSC Image Mode(GrayScale/Binaly) is not Correct.”
“ LSC 图像类型错误（多值/2 值）”
E632006 “LSC Undefined Window ID Request.”
“ 未定义的窗口 “
E632020 “LSC Para Count is invalid.”
“ LSC 同时识别次数与设置值不一样 “
E632021 “LSC Nouse Sequence No.”
“ LSC 识别顺序号错误 “
E632022 “LSC Undefined Sequence No.”
“ 未定义的 LSC 识别顺序号”
E632023 “LSC Vision Control Semaphore Wait Timeout.”
“ 要获得图像控制信号时失败（发生超时） “
E632099 “LSC Undefined Error Happened.”
“ 发生其它未定义错误 “
E633000 “LSC Primitive Error:Sensor Status Error.”
“ LSC 错误：传感器状态错误 “
E633001 “LSC Primitive Error:Command Syntax Error.”
“ LSC 错误：命令语法错误 “
E633002 “LSC Primitive Error:Illegal Command.”
“ LSC 错误：执行未定义的命令 “
E633003 “LSC Primitive Error:Command Parameter Error.”
“ LSC 错误：命令参数错误 “
E633004 “LSC Primitive Error:Command Parameter out of range.”
“ LSC 错误：参数超过设置范围”
E633005 “LSC Primitive Error:Window Overlap.”
“ LSC 错误：窗口重迭 “
E633006 “LSC Primitive Error:Undefined Window.”
“ LSC 错误：执行未定义的窗口 “
E633007 “LSC Primitive Error:Active Window count limit exceeded(>16).”
“ LSC 错误：活动窗口过多（大于 16） “
E633008 “LSC Primitive Error:Operation cannot be performed.”
“ LSC 错误：此命令无效 “
E633009 “LSC Primitive Error:Window not active.”
“ LSC 错误：无效的窗口 “
E633010 “LSC Primitive Error:Parameter missing.”
“ LSC 错误：参数个数有错 “
E633011 “LSC Primitive Error:Bad Check Summ.”
“ LSC 错误：LSC 通讯 Check Summ 错误 “
E633012 “LSC Primitive Error:Command not implemented.”
“ LSC 错误：执行没有安装的命令 “
E640000 “MTC SYSTEM ERROR (E000) : Command Error.”
“MTC 系统错误(E000) : 指令错误”
E640001 “MTC SYSTEM ERROR (E001) : Parameter Error.”
“MTC 系统错误(E001) : 参数错误”
E640002 “MTC SYSTEM ERROR (E002) : Empty Parts.”
“MTC 系统错误(E002) : 无组件”
E640003 “MTC SYSTEM ERROR (E003) : Ready Time Out.”
“MTC 系统错误(E003) : 准备超时”
E640004 “MTC SYSTEM ERROR (E004) : ETX Time Out.”
“MTC 系统错误(E004) : 正文结束符(ETX)超时”
E640005 “MTC SYSTEM ERROR (E005) : Sync Character Time Out.”
“MTC 系统错误(E005) : 同步字符超时”
E640006 “MTC SYSTEM ERROR (E006) : Response Time Out.”
“MTC 系统错误(E006) : 应答超时”
E640007 “MTC SYSTEM ERROR (E007) : Data Error.”
“MTC 系统错误(E007) : 数据错误”
E640008 “MTC SYSTEM ERROR (E008) : Receiving Invalid Response.”
“MTC 系统错误(E008) : 接收无效应答”
E640009 “MTC SYSTEM ERROR (E009) : MTC is Off-line.”
“MTC 系统错误(E009) : MTC 处于脱机状态”
E640012 “MTC SYSTEM ERROR (E012) : Unlocking Stacker.”
“MTC 系统错误(E012) : 没有锁定托盘存储箱”
E640013 “MTC SYSTEM ERROR (E013) : Vacuum Error (Head).”
“MTC 系统错误(E013) : 吸取发生错误(Head)”
E640014 “MTC SYSTEM ERROR (E014) : Vacuum Error (Shuttle)”
“MTC 系统错误(E014) : 吸取发生错误(滑梭)”
E640015 “MTC SYSTEM ERROR (E015) : Unable to Recovery Component.”
“MTC 系统错误(E015) : 不能回收组件”
E640017 “MTC SYSTEM ERROR (E017) : Not Finding Tray.”
“MTC 系统错误(E017) : 没有发现托盘”
E640018 “MTC SYSTEM ERROR (E018) : Cover Open.”
“MTC 系统错误(E018) : 机箱盖被打开”
E640023 “MTC SYSTEM ERROR (E023) : Conveyor Error (Head).”
“MTC 系统错误(E023) : 搬运发生错误(Head)”
E640024 “MTC SYSTEM ERROR (E024) : Conveyor Error (Shuttle).”
“MTC 系统错误(E024) : 搬运发生错误(滑梭)”