JUKI贴片机错误代码集合.pdf - 第282页
Please re-write the pr ogram in the IMGCPU. Please re-boot your machine. E630215 “ Vision Syst em: It is unprescribed ERR code. ERR15 code ” “ 图像处理硬件错误 :| 系统 服务作业（ System Service Task ）发生超时 ” [Cause] Unprescribed error r…
E630211 “Vision System: A time-out error of the serial communication occurred”
“图像处理硬件错误:|SIO 超时”
[Cause]
COM port does not return any response.
Another application is using COM port.
[Treatment]
Please re-start the application.
E630212 “Vision System: An error in capturing an image occurred. Hardware abnormality”
“图像处理硬件错误:|GRAB 未结束”
[Cause]
IMGCPU is broken.
The camera cable is not connected to the board or to camera properly.
The camera cable is broken.
The voltage is getting low in the IMGCPU.
The camera is broken.
[Treatment]
Please change IMGCPUs. Please examine the camera cable.
Please change the camera cables.
Please re-adjust the power supply module(VME+5V).
Please change the cameras and adjust the new one.
Please re-boot your machine.
E630213 “Vision System: An error occurred in the internal driver”
“图像处理硬件错误:|硬件的宏指令错误”
[Cause]
IMGCPU is broken.
The program could not be written in the IMGCPU properly.
[Treatment]
Please change IMGCPUs.
Please re-write the program in the IMGCPU.
Please re-boot your machine.
E630214 “Vision System: The running command got a time-out”
“图像处理硬件错误:|内部命令发生超时”
[Cause]
IMGCPU is broken.
The program could not be written in the IMGCPU properly.
[Treatment]
Please change IMGCPUs.
Please re-write the program in the IMGCPU.
Please re-boot your machine.
E630215 “Vision System: It is unprescribed ERR code. ERR15 code”
“图像处理硬件错误:|系统服务作业（System Service Task）发生超时”
[Cause]
Unprescribed error response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment]
Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630216 “Vision System: It is unprescribed ERR code. ERR16 code”
“图像处理硬件错误: 16”
[Cause]
Unprescribed error response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment]
Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630217 “Vision System: It is unprescribed ERR code. ERR17 code”
“图像处理硬件错误: 17”
[Cause]
Unprescribed error response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment]
Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630218 “Vision System: It is unprescribed ERR code. ERR18 code”
“图像处理硬件错误: 18”
[Cause]
Unprescribed error response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment]
Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630219 “Vision System: It is unprescribed ERR code. ERR19 code”
“图像处理硬件错误: 19”
[Cause]
Unprescribed error response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment]
Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630220 “Vision system hardware error: 20”
“图像处理硬件错误: 20”
E630300 “ViLib Thread: Other illogical matter occurred”
“图像<->ViLib I/F 错误:|发生其它不合理现象”
[Cause]
An unexpected error occurred in the vision device driver.
[Treatment]
Please re-boot your machine.
E630301 “ViLib Thread: Turnaround time-out occurred”
“图像<->ViLib I/F 错误:|应答超时”
[Cause]
There is no response from VCS.
[Treatment]
Please re-boot your machine.
E630999 “Vision Recognized error:| Other errors (detais unknown).”
“图像识别错误:|其它错误(未知详细错误)”
E631010 “ViRecog Error: No mark can be found. Please examine the PWB”
“标记识别错误:检查错误”
[Cause]
The actual mark coordinates are different from that in the data.
There is no mark on the board.
The ref. pin is not in the ref. hole properly.
A wrong board was loaded.
The light is not ON.