JUKI贴片机错误代码集合.pdf - 第13页
“ 释放 MC 线程 4 。 ” E108240 “ Releasing MC thread 1(Device Manager) .” “ 释放 MC 线程 1( 设备管理 ) 失败。 ” E108241 “ Releasing MC thread 2(Scheduler) .” “ 释放 MC 线程 2( 调度程序 ) 失败。 ” E108242 “ Releasing MC thread 3(Sub-Scheduler) .” “ …
“建立 MC 线程 4。|请关闭程序，重新启动。”
I108150 “Creating axis-controlling threads.”
“正在进行轴初始化。”
E108151 “Failed to Create axis-controlling threads. |Abort the process.”
“轴初始化失败。|请关闭程序，重新启动。”
I108160 “Creating XY-Robot threads.”
“建立 XY-Robot 线程。”
E108161 “Failed to Create XY-Robot threads.|Abort the process.”
“建立 XY-Robot 线程失败。|请关闭程序，重新启动。”
I108170 “MC initialization has been completed.”
“结束 MC 的初始化。”
I108180 “MC is waiting for MM-side preparation.”
“MC 进入 MM 的准备完毕等待状态。”
I108190 “Creating MC error handler.”
“开始进行 MC 的错误处理。”
E108191 “Failed to Create MC error handler.|Abort the process.”
“MC 错误处理的初始化失败。|请关闭程序，重新启动。”
I108200 “Starting MC.”
“开始进行 MC 的处理。”
I108210 “Ready to complete MC sub-system.”
“进入 MC 的退出准备状态。”
I108220 “Started to complete MC sub-system.”
“开始 MC 的退出处理。”
I108230 “Releasing MC thread 1(Device Manager).”
“释放 MC 线程 1(设备管理)。”
I108231 “Releasing MC thread 2(Scheduler).”
“释放 MC 线程 2(调度程序)。”
I108232 “Releasing MC thread 3(Sub-Scheduler).”
“释放 MC 线程 3(补助调度程序)。”
I108233 “Releasing MC thread 4.”
“释放 MC 线程 4。”
E108240 “Releasing MC thread 1(Device Manager).”
“释放 MC 线程 1(设备管理)失败。”
E108241 “Releasing MC thread 2(Scheduler).”
“释放 MC 线程 2(调度程序)失败。”
E108242 “Releasing MC thread 3(Sub-Scheduler).”
“释放 MC 线程 3(补助调度程序)失败。”
E108243 “Releasing MC thread 4.”
“释放 MC 线程 4 失败。”
I108250 “Releasing axis-controlling threads.”
“释放轴处理。”
E108251 “Failed to Release axis-controlling threads.”
“释放轴处理失败。”
I108260 “Releasing MC sub-system.”
“释放 MC。”
E108280 “Cannot access A drive.|Check if FD is correctly inserted.”
“不能访问为软驱。|请检查软盘”
E108281 “Failed to start driver. %s ( error code: %d )”
“驱动器的启动失败。%S(错误代码:%d)”
E108282 “There is no data to save.”
“没有可保存的数据。”
E108283 “Failed to copy file.”
“文件拷贝失败。”
I108284 “File size exceeds 1 MB limit. The file is split to copy. Copy file No. %d/%d.”
“文件大小超过 1M，分块输出。复制第%d/%d 张。”
Q108285 “Failed to copy file. Do you want to try again?”
“文件拷贝失败，是否再试一次？”
E109000 “Failed to interface with the Axis drivers.”
“连接轴驱动器失败。”
E109001 “Failed to interface with the Safety drivers.”
“连接安全驱动器失败。”
E109002 “Failed to interface with the Laser drivers.”
“连接激光驱动器失败。”
E109003 “Failed to interface with the Conveyor drivers.”
“连接搬运驱动器失败。”
E109004 “Failed to interface with the AWC drivers.”
“连接自动调整基板宽度驱动器失败。”
E109005 “Failed to interface with the MTC/MTS/DTS drivers.”
“连接 MTC/MTS/DTS 驱动器失败。”
E109110 “Fatal error occurred in constructing axes structure. | Abort the process”
“建立轴处理构造失败。|请关闭程序，重新启动。”
[Cause]
An error occurred in the process of creating axis structure that meets the machine hardware.
[Treatment]
Please turn on the power supply of the machine after finishing everything and shutting down the
machine.
If the error occurs even after the rebooting, there is a possibility that a system file is broken.
Please take a note of the error number and contact our technical service dept. for information.
E109120 “Fatal error occurred in initializing axes. | Abort the process”
“轴初始化失败。|请关闭程序，重新启动。”
[Cause]
An error occurred while starting the Axis Control process.
[Treatment]
Please turn on the power supply of the machine after finishing everything and shutting down the
machine.
If the error occurs even after the rebooting, there is a possibility that a system file is broken or that
something is wrong with XMP board or other connectors. .
Please take a note of the error number and contact our technical service dept. for information.
E109130 “Failed to originate, Please retry”
“返回原点失败，请再次执行。”
[Cause]
An error occurred during the Home returning process.
1): Detailed code
2): An error of the axis process
[Treatment]