JUKI贴片机错误代码集合.pdf - 第249页

E612077 “ The nozzle cannot be detected by measuring t he length of the nozzle.|Please conf irm the nozzle. (L2-head) ” “ 测量吸 嘴长度时，没有发现吸嘴。 | 请检查吸嘴 。 (L2 Head) “ E613077 “ The nozzle cannot be detected by measuring t he l…

100%1 / 464
E613064 “Laser sensor might be dirty. |Please clean the sensor. (L3-head)”
“ 激光传感器可能被弄脏。|请把传感器擦干净。(L3 Head) “
E614064 “Laser sensor might be dirty. |Please clean the sensor. (L4-head)”
“ 激光传感器可能被弄脏。|请把传感器擦干净。(L4 Head) “
E615064 “Laser sensor might be dirty. |Please clean the sensor. (R1-head)”
“ 激光传感器可能被弄脏。|请把传感器擦干净。(R1 Head) “
E616064 “Laser sensor might be dirty. |Please clean the sensor. (R2-head)”
“ 激光传感器可能被弄脏。|请把传感器擦干净。(R2 Head) “
E617064 “Laser sensor might be dirty. |Please clean the sensor. (R3-head)”
“ 激光传感器可能被弄脏。|请把传感器擦干净。(R3 Head) “
E618064 “Laser sensor might be dirty. |Please clean the sensor. (R4-head)”
“ 激光传感器可能被弄脏。|请把传感器擦干净。(R4 Head) “
E611065 “An error occurred when detecting the laser dirt. (L1-head)”
“ 检查激光是否干净时，发生错误。(L1 Head) “
E612065 “An error occurred when detecting the laser dirt. (L2-head)”
“ 检查激光是否干净时，发生错误。(L2 Head) “
E613065 “An error occurred when detecting the laser dirt. (L3-head)”
“ 检查激光是否干净时，发生错误。(L3 Head) “
E614065 “An error occurred when detecting the laser dirt. (L4-head)”
“ 检查激光是否干净时，发生错误。(L4 Head) “
E615065 “An error occurred when detecting the laser dirt. (R1-head)”
“ 检查激光是否干净时，发生错误。(R1 Head) “
E616065 “An error occurred when detecting the laser dirt. (R2-head)”
“ 检查激光是否干净时，发生错误。(R2 Head) “
E617065 “An error occurred when detecting the laser dirt. (R3-head)”
“ 检查激光是否干净时，发生错误。(R3 Head) “
E618065 “An error occurred when detecting the laser dirt. (R4-head)”
“ 检查激光是否干净时，发生错误。(R4 Head) “
E611077 “The nozzle cannot be detected by measuring the length of the nozzle.|Please confirm the nozzle.
(L1-head)”
“ 测量吸嘴长度时，没有发现吸嘴。|请检查吸嘴。(L1 Head) “
E612077 “The nozzle cannot be detected by measuring the length of the nozzle.|Please confirm the nozzle.
(L2-head)”
“ 测量吸嘴长度时，没有发现吸嘴。|请检查吸嘴。(L2 Head) “
E613077 “The nozzle cannot be detected by measuring the length of the nozzle.|Please confirm the nozzle.
(L3-head)”
“ 测量吸嘴长度时，没有发现吸嘴。|请检查吸嘴。(L3 Head) “
E614077 “The nozzle cannot be detected by measuring the length of the nozzle.|Please confirm the nozzle.
(L4-head)”
“ 测量吸嘴长度时，没有发现吸嘴。|请检查吸嘴。(L4 Head) “
E615077 “The nozzle cannot be detected by measuring the length of the nozzle.|Please confirm the nozzle.
(R1-head)”
“ 测量吸嘴长度时，没有发现吸嘴。|请检查吸嘴。(R1 Head) “
E616077 “The nozzle cannot be detected by measuring the length of the nozzle.|Please confirm the nozzle.
(R2-head)”
“ 测量吸嘴长度时，没有发现吸嘴。|请检查吸嘴。(R2 Head) “
E617077 “The nozzle cannot be detected by measuring the length of the nozzle.|Please confirm the nozzle.
(R3-head)”
“ 测量吸嘴长度时，没有发现吸嘴。|请检查吸嘴。(R3 Head) “
E618077 “The nozzle cannot be detected by measuring the length of the nozzle.|Please confirm the nozzle.
(R4-head)”
“ 测量吸嘴长度时，没有发现吸嘴。|请检查吸嘴。(R4 Head) “
E611078 “The length of the nozzle is too long.|Please confirm the nozzle. (L1-head)”
“ 吸嘴长度过长。|请检查吸嘴。(L1 Head) “
E612078 “The length of the nozzle is too long.|Please confirm the nozzle. (L2-head)”
“ 吸嘴长度过长。|请检查吸嘴。(L2 Head) “
E613078 “The length of the nozzle is too long.|Please confirm the nozzle. (L3-head)”
“ 吸嘴长度过长。|请检查吸嘴。(L3 Head) “
E614078 “The length of the nozzle is too long.|Please confirm the nozzle. (L4-head)”
“ 吸嘴长度过长。|请检查吸嘴。(L4 Head) “
E615078 “The length of the nozzle is too long.|Please confirm the nozzle. (R1-head)”
“ 吸嘴长度过长。|请检查吸嘴。(R1 Head) “
E616078 “The length of the nozzle is too long.|Please confirm the nozzle. (R2-head)”
“ 吸嘴长度过长。|请检查吸嘴。(R2 Head) “
E617078 “The length of the nozzle is too long.|Please confirm the nozzle. (R3-head)”
“ 吸嘴长度过长。|请检查吸嘴。(R3 Head) “
E618078 “The length of the nozzle is too long.|Please confirm the nozzle. (R4-head)”
“ 吸嘴长度过长。|请检查吸嘴。(R4 Head) “
E611079 “The length of the nozzle is too short.|Please confirm the nozzle. (L1-head)”
“ 吸嘴长度过短。|请检查吸嘴。(L1 Head) “
E612079 “The length of the nozzle is too short.|Please confirm the nozzle. (L2-head)”
“ 吸嘴长度过短。|请检查吸嘴。(L2 Head) “
E613079 “The length of the nozzle is too short.|Please confirm the nozzle. (L3-head)”
“ 吸嘴长度过短。|请检查吸嘴。(L3 Head) “
E614079 “The length of the nozzle is too short.|Please confirm the nozzle. (L4-head)”
“ 吸嘴长度过短。|请检查吸嘴。(L4 Head) “
E615079 “The length of the nozzle is too short.|Please confirm the nozzle. (R1-head)”
“ 吸嘴长度过短。|请检查吸嘴。(R1 Head) “
E616079 “The length of the nozzle is too short.|Please confirm the nozzle. (R2-head)”
“ 吸嘴长度过短。|请检查吸嘴。(R2 Head) “
E617079 “The length of the nozzle is too short.|Please confirm the nozzle. (R3-head)”
“ 吸嘴长度过短。|请检查吸嘴。(R3 Head) “
E618079 “The length of the nozzle is too short.|Please confirm the nozzle. (R4-head)”
“ 吸嘴长度过短。|请检查吸嘴。(R4 Head) “
E611080 “The nozzle is long and length is too long.|Please confirm the nozzle. (L1-head)”
“ 吸嘴长度过长。|请检查吸嘴。(L1 Head) “
E612080 “The nozzle is long and length is too long.|Please confirm the nozzle. (L2-head)”
“ 吸嘴长度过长。|请检查吸嘴。(L2 Head) “
E613080 “The nozzle is long and length is too long.|Please confirm the nozzle. (L3-head)”
“ 吸嘴长度过长。|请检查吸嘴。(L3 Head) “
E614080 “The nozzle is long and length is too long.|Please confirm the nozzle. (L4-head)”
“ 吸嘴长度过长。|请检查吸嘴。(L4 Head) “
E615080 “The nozzle is long and length is too long.|Please confirm the nozzle. (R1-head)”