JUKI贴片机错误代码集合.pdf - 第126页
I507605 “ In loading synthesis offset product ion, please start production after performing a re-clamp .” " 贴片综合偏移量生产时，请进行重 夹之后再开始生产。 " I507607 “ Tracking- Select Placement works .” " 跟踪贴片开始运行。 " Q507…
Q507000 “Resume Pause is stopping.|Return to Home Position?”
"恢复暂停状态，|是否运行返回原点？"
Q507100 “The production mode is changed from Mixture to Simultaneous by the range in the point equipped
with specification.|Is production executed?”
"依据贴片点指定范围不同，生产方式由混合生产转变成同时生产，|是否进行生产？"
Q507101 “The production mode is changed from Mixture to Sequential by the range in the point equipped
with specification.|Is production executed?”
"依据贴片点指定范围不同，生产方式由混合生产转变成次序生产，|是否进行生产？"
Q507200 “Compo. below the maximum in near short values of the object Compo. do not exist.|Is not the
Automatic Pick Trace executed and is production restarted?”
"不存在小于对象组件宽度最大值的组件，|不执行自动跟踪吸取，是否重新开始生产？"
Q507201 “Parts of the object Compo. are outside ranges.|There are Compo which do not execute the
Automatic Pick Trace.|Is production restarted?”
"对象组件的一部分处于范围外，|存在不执行自动跟踪吸取的组件。|是否重新开始生产？
"
Q507300 “Is the PWB actually ejected and is it good?”
"是否确实搬出基板？"
Q507400 “The machine works . Is it good?”
"机器开始运行，是否继续？"
Q507500 “Omit this placement ?”
" 是否贴片设置成[执行]？ "
Q507501 “Continuous production file is changed. Save the change?”
"继续生产信息已被修改，是否保存继续生产信息？"
Q507510 “%s descends. Is there feeder etc. below the head ?”
" %s 下降 | Head 下面有没有送料器等？ "
Q507511 “Would you like to begin axis move?”
" 是否开始生产？ "
Q507601 “Do you want to start production for measuring general placement offset?”
"是否开始贴片综合偏差生产？"
Q507604 “The last recognition data is not reflected in offset. May I clear information?”
"上次识别的数据没有反映到 MS 参数的偏移量中，是否清除信息？"
I507605 “In loading synthesis offset production, please start production after performing a re-clamp.”
"贴片综合偏移量生产时，请进行重夹之后再开始生产。"
I507607 “Tracking- Select Placement works.”
"跟踪贴片开始运行。"
Q507700 “Are you sure you want to display the error image data? Choosing this feature disables the viewing
and saving the error images.”
“不能显示错误图像，是否输出文件？”
I507701 “Failed to recognize image.”
“图像识别失败。”
E507800 “Cannot use extended bad mark”
“不能使用电路外的坏板标记。”
E507801 “Extended bad mark has not been specified.”
“没有定义电路外的坏板标记。”
E508001 “Pause as component protection. Take off component”
“为保护组件暂停，请取下组件。”
[Cause]
This message appears before disposing a protective component while a production.
[Treatment]
Please take the component off and press OK button.
I508002 “The IC conveyor belt is fullness.|Please Remove Component from IC conveyor belt.”
“IC 回收器被装满，|请卸取下组件。”
I508003 “The SemiAuto Trash box is not at the abandonment position.|Please set the SemiAuto Trash box at
the abandonment position.”
“半自动废弃盒不在废弃位置，|请把半自动废弃盒设置在废弃位置。”
E508100 “Set online for MTS”
“请连接 MTS。”
[Cause]
This message appears if MTS is not online when starting a production.
[Treatment]
Please put MTS in online status and press OK button. Pressing Cancel button will have you back to
the status that is before pressing START key.
E508101 “Please close the door of MTS”
“请关闭 MTS 机箱门。”
[Cause]
This message appears if the MTS door is open when starting a production.
[Treatment]
Please close the MTS door and press OK button. Pressing Cancel button will have you back to the
status that is before pressing START key.
E508200 “Remove the component from %s”
“请取下%s 上的组件。”
[Cause]
This message appears when starting a production after a request of taking a protective component off
is issued and the head is moved to the component disposal position.
[Treatment]
Please take the component off the head and press OK button.
E508300 “The cause of the pause is not out of component. Measurement cannot be performed”
“不是因无组件而暂停，|不能执行测量。”
[Cause]
This message appears when a measurement functionality gets called by pressing F5 key while pausing
and the components are not running out.
[Treatment]
Please press OK button.
I508310 “The cause of the pause is not out of component.|Inspection can not be performed.”
“不是因无组件而暂停，|不能执行检查。”
I508320 “The cause of the pause is not out of component.|Inspection can not be performed.”
“不是因无组件而暂停，|不能执行检查。”
I508400 “There is no component to be measured its height.”
“测量组件高度的对象组件不存在。”
I508410 “There is no component which execute the verification inspection.”
“数值检查所需的对象组件不存在。”
I508420 “There is no component which execute the SOT direction inspection.”
“SOT 方向检查的对象组件不存在。”
I508500 “The position where a %s is restarted is the place data only in a %s. |The restart production cannot be
done. |Please put the data again or clear the restart data.”
“%s 的重新开始位置是只对应%s 的贴片数据。|不能进行重新生产。|请重新输入数据，或
删除重新开始数据。