JUKI贴片机错误代码集合.pdf - 第409页
W2513 “ It cannot be placed in front of a dispenser. “ " 在分配前不能设置。 " W2514 “ It cannot be replaced with a dispenser. “ " 不能用分配者代替。 " W2515 “ It cannot be replaced with mounter. “ " 不能用贴片代替。 "…
E2008 “Protect module is not connected. “
"没有连接保护模式。"
E2009 “Network ID is already used. “
"已经使用网络 ID。"
E2010 “Station Name is already used. “
"已经使用配置 ID。"
W2501 “Setting is updated.Shall it be saved? “
"设置被更新，需要保存吗？"
W2502 “Layout will be completely cleared.Is this OK? “
"将完全清除层设置，确定吗？"
W2503 “Settings will all be cleared.Is this OK? “
"清除所有的设置，确定吗？"
W2504 “Changes will all be aborted.Is this OK? “
" 所有改变将被放弃，确定吗?"
W2505 “Station side conditions have been obtained.Shall profile be updated? “
"已获得位置面情况，要更新剖面设置吗？"
W2506 “Station type is changed.Is this OK? “
"改变位置类型，确定吗？"
W2507 “Everything starting from the first incomplete line which appears will be cleared.Is this OK? “
"所有问题都是从第一个不完全线上开始的，它将被删除，确定吗？"
W2508 “Type of device is changed.Is this OK?
“
"改变设置类型，确定吗？"
W2509 “Current station profile will be deleted. OK? “
"删除当前位置的剖面。"
W2510 “Station cannot be deleted because it is already installed in the line. “
"因为已经安装在线上，位置不能被删除。"
W2511 “Preset station exists in front. “
"在前面事先调整的位置已经存在。"
W2512 “Mounter exists in front. “
"前面不存在贴片。"
W2513 “It cannot be placed in front of a dispenser. “
"在分配前不能设置。"
W2514 “It cannot be replaced with a dispenser. “
"不能用分配者代替。"
W2515 “It cannot be replaced with mounter. “
"不能用贴片代替。"
W2516 “Station cannot be changed because it is already installed in the line. “
"位置不能被改变因为已经安装在线上"
W2517 “MTC will cause a conflict with permanent feeders. clear the area fron R-55 to R-63, then let MTC
use area. “
"MTC 将导致和永久进料器的冲突，清除从 R55 到 R63 区域，让 MTC 使用区域。"
W2508 "Type of device is changed. Is this OK?"
"传送选项(长，宽)设置已被修改，初始化基板尺寸和基准坐标。"
W2520 “Data of different style packaging cannot be copied. “
"不同类型包装的数据不能复制。 "
E2900 emory is not enough in optimization.
"未受保护的优化区域处理正在进行。"
[Cause]
Indicates insufficient free memory space.
[Deal]
Exit from other applications and retry the process.
E2901 Not found optimization message.
"挑选数据不完全。"
[Cause]
A failure was found in the data.
[Deal]
Complete the pick data.
E2902 System error.
"出现系统错误。"
[Cause]
Initializing DLL was failed.
[Deal]
Loading the files required by HLC was failed. Reinstall the system.
W2903 “Optimization processing is being aborted. “
"优化过程失败。"
E2907 Pick data is not complete.
[Cause]
The function Opt3SimulParralelCreate returned error number 700.
[Deal]
Consult the manufacturer.
E2911 Data is incorrect ,so stop allocation pick data of MTC.
"不正常数据探测; MTC 位置分配失败。"
[Cause]
A failure was found in the MTC data.
[Deal]
Correct the part data and pick data (MTC), and retry the process.
E2912 Data is incorrect so stop calculation for placement number.
"不正常数据已经导致计算贴片数量失败。"
[Cause]
A failure was found in the program data.
[Deal]
Rebuild the program data.
E2913 Data is incorrect ,so stop calculation for placement peak point.
"不正常数据已经导致贴片最高点计算失败。"
[Cause]
A failure was found in the program data.
[Deal]
Correct the mounting data, and retry the process.
E2914 Data is incorrect, so stop allocation for number of picking.
"不正常数据已经导致依照选取顺序分配失败。"
[Cause]
A failure was found in the program data.
[Deal]
Correct the pick data, and retry the process.
E2915 Sorting for placement layer and nozzle number is abnormal end.
"贴片层同一吸嘴号处理不正常。"
[Cause]
A failure was found in the program data.