JUKI贴片机错误代码集合.pdf - 第294页
E631124 “ Random bal l recognition error: B al l existence inspection (brig ht ness) error .” “ 任意球 识别错误 : 检查球是否存在 ( 亮度 ) 出错 ” E631125 “ Random bal l recognition error: T oo few sampl es for ball existe nce inspection (b…
E631084 “ Outline recognition error: Horizontal/vertical distance between marks is deviated by 0.5-mm or
more from the set value.”
“外形识别错误:上下左右标记间距大于+-0.5mm”
E631085 “ Outline recognition error: Component recognition error (analyze code for the details).”
“外形识别错误:组件错误（详细内容请参考代码解释）”
E631100 “ Multi lead recognition error: Detected lead bend.”
“多引脚识别错误:引脚弯曲错误”
E631101 “ Multi lead recognition error: Detect lead length error.”
“多引脚识别错误:引脚长度错误”
E631102 “ Multi lead recognition error: Lead pitch error”
“多引脚识别错误:引脚间距错误”
E631103 “ Multi lead recognition error: Detected leads are fewer than specified.”
“多引脚识别错误:引脚数少于设置值”
E631104 “ Multi lead recognition error: Detected leads are more than specified.”
“多引脚识别错误:引脚数多于设置值”
E631105 “ Multi lead recognition error: No leads are detected.”
“多引脚识别错误:没有发现引脚”
E631106 “ Multi lead recognition error: Detected lead count is 1 to 3.”
“多引脚识别错误:只有 1-3 个引脚”
E631107 “ Multi lead recognition error: Cannot position.”
“多引脚识别错误:不能确定组件位置”
E631108 “ Multi lead recognition error: Cannot detect leads.”
“多引脚识别错误:不能检测引脚”
E631120 “ Random ball recognition error: Ball pitch error”
“任意球识别错误:球间距错误”
E631121 “ Random ball recognition error: Ball variant inspection error”
“任意球识别错误:球变形检查错误”
E631122 “ Random ball recognition error: Ball diameter-inspection error”
“任意球识别错误:球直径检查错误”
E631123 “ Random ball recognition error: Ball existence inspection (diameter) error.”
“任意球识别错误:检查球是否存在(直径)出错”
E631124 “ Random ball recognition error: Ball existence inspection (brightness) error.”
“任意球识别错误:检查球是否存在(亮度)出错”
E631125 “ Random ball recognition error: Too few samples for ball existence inspection (brightness).”
“任意球识别错误:检查球是否存在(亮度)的样品数偏少”
E631140 “ Ball inspection error: Ball detection error”
“球检查错误:球检查错误”
E631141 “ Ball inspection error: Ball matrix size error”
“球检查错误:球矩阵大小错误”
E631142 “ Ball inspection error: Ball count error”
“球检查错误:球数错误”
E631143 “ Ball inspection error: Ball diameter error”
“球检查错误:球直径错误”
E631144 “ Ball inspection error: Error in getting brightness reference”
“球检查错误:亮度基准取得错误”
E631145 “ Ball inspection Error: Brightness characteristics error”
“球检查错误:亮度特性错误”
E631160 “ Outline measurement error: Component tilt is too large.”
“外形测量错误:组件过于倾斜”
E631161 “ Outline measurement error: Component size is too large.”
“外形测量错误:组件尺寸过大”
E631162 “ Outline measurement error: Component size is too small.”
“外形测量错误:组件尺寸过小”
E631163 “ Outline measurement error: Cannot find a component.”
“外形测量错误:组件不存在”
E631170 “ Lead measurement error: Unknown lead pitch”
“引脚测试错误:不是适当的引脚间距”
E631171 “ Lead measurement error: Cannot detect leads.”
“引脚测试错误:没有引脚”
E631180 “ Template matching error: A similar pattern is found in the upper part of the searched area.”
“ 模板自动取得错误:因上面有类似的模式”
[Cause]
The user defined template has a similar patter in the upper part of the template.
[Treatment]
Please re-teach other user defined templates to the machine.
If you do not have other user defined templates, current template will be taken in although the
template may not be recognized correctly.
Q631181 “There is a similar pattern in the lower part of the template. | Would you like to take the teaching
results in?”
“ 模板自动取得错误:因下面有类似的模式”
[Cause]
The user defined template has a similar patter in the upper part of the template.
[Treatment]
Please re-teach other user defined templates to the machine.
If you do not have other user defined templates, current template will be taken in although the
template may not be recognized correctly.
Q631182 “There is a similar pattern on the left side of the template. | Would you like to take the teaching
results in?”
“模板自动取得错误:因左面有类似的模式”
[Cause]
The user defined template has a similar patter on the left side of the template.
[Treatment]
Please re-teach other user defined templates to the machine.
If you do not have other user defined templates, current template will be taken in although the
template may not be recognized correctly.
Q631183 “There is a similar pattern on the right side of the template. | Would you like to take the teaching
results in?”
“模板自动取得错误:因右面有类似的模式”
[Cause]
The user defined template has a similar patter on the right side of the template.
[Treatment]
Please re-teach other user defined templates to the machine.
If you do not have other user defined templates, current template will be taken in although the
template may not be recognized correctly.
Q631184 “The template does not have enough contrast. | Would you like to take the teaching results in?”
“模板自动取得错误:对比度过低(存在类似模板)”
[Cause]
The user defined template does not have enough contrast.