JUKI贴片机错误代码集合.pdf - 第5页

初始化发生致命的错误。 The details of the error during t he initialization are shown an d the system is shut down. 显示初始化详细错误，并退出系统。 No: Detailed error code (Hexadecimal display) No: 详细错误代码 ( 1 6 进制显示 ) 0~3F: Failure count in creati…

100%1 / 464
E100103 “You are trying to show the same language duplicately.”
“显示语言有同样的语言。”
E100104 “Languages shown should come first.”
“请填满语言选择按钮。”
W100110 “You made changes in Language Selection. Do you want to exit without saving these changes?”
“更新设置信息，是否不保存更新信息，退出语言设置？”
E100111 “You have not selected a language.”
“没有选择显示语言。”
E102010 “Fatal system error occurred. | Abort the process”
“系统初始化失败。|请关闭程序，重新启动。”
[Cause]
A critical error occurred while initializing the system.
系统初始化发生致命的错误。
[Treatment]
Please turn on the power supply of the machine after finishing everything and shutting down the
machine.
退出所有程序，并关闭计算器后，重新启动主机。
If the error occurs even after the rebooting, there is a possibility that a system file is broken.
如果重新启动也发生同样错误，系统文件可能已破坏。
Please take a note of the error number and contact our technical service dept. for information.
请记好错误代码，并与代理店或本公司技朮服务部联系。
E102020 “You tried to start up, before the end of the previous system program.|Exit the system program, and
start again.”
“程序被重复启动。|请关闭程序，重新运行。”
[原因]
前一个主进程未完全结束，下一个主进程被启动。
[解决]
退出所有程序，并关闭计算器后，重新启动主机。
如果重新启动也发生同样错误，系统文件可能已破坏。
请记好错误代码，并与代理店或本公司技朮服务部联系。
E102100 “There was a fatal failure while starting the KE-2000system. | Avoiding the possible damages, the
system is going to abort the process. (Error code = %d)”
“启动 KE-2000 系统时发生错误。|请关闭程序，重新启动。(错误代码 = %d ) “
[Cause]
A critical error occurred during the initialization.
初始化发生致命的错误。
The details of the error during the initialization are shown and the system is shut down.
显示初始化详细错误，并退出系统。
No: Detailed error code (Hexadecimal display)
No: 详细错误代码 (16进制显示)
0~3F: Failure count in creating flags to manage events
0 ～ 3F ： 创建处理事件标记失败数
40: Failure count in initializing IPC for internal communication
40 ： 内部通讯用 IPC 的初始化失败。
100: MC starting error.
100： MC 起动错误
101: MC starting procedure 1 error
101： MC 起动过程 1 错误
102: MC starting procedure 2 error
102 ： MC起动过程 2 错误
103: MC starting procedure 3 error
103 ： MC起动过程 3 错误
104: MC starting procedure 4 error
104 ： MC起动过程 4 错误
105: MC starting procedure 5 error
105 ： MC起动过程 5 错误
106: TIME-OUT of driver initialization 　 5min.
106 ： 驱动器初始化超时（5 分）
107: TIME-OUT of the main process initialization on the MC side.
107 ： MC主进程初始化超时
200: MC presence check.
200 ： 检查 MC 是否存在
401: Failure in creating memory for design value data.
401
： 建立设计值数据内存失败
402: Failure in creating memory for MS parameter
402 ： 建立 MS 参数内存失败
403: Failure in creating memory for Mech. Control parameter.
403 ： 建立机器控制参数用内存失败
404: Failure in creating memory for Mech.-pos.
404 ： 建立机器位置用内存失败
405: Failure in creating memory for the operation options.
405 ： 建立操作选项用内存失败
406: Failure in creating memory for Setup data.
406 ： 建立配置数据用内存失败
407: Failure in creating memory for historical information.
407 ： 建立历史数据用内存失败
408: Failure in creating memory for error log.
408 ： 建立错误日志用内存失败
409: Failure in creating memory for the data on the MM side.
409 ： 建立 MM 数据用内存失败
40A: Failure in creating memory for the production program file header.
40A ： 建立生产程序文件标题用内存失败
40B: Failure in creating memory for the PWB data.
40B ： 建立基板数据用内存失败
40C: Failure in creating memory for the Placement data.
40C ： 建立搭载数据用内存失败
40D: Failure in creating memory for the Component data.
40D ： 建立组件数据用内存失败
40E: Failure in creating memory for the Pick data.
40E ： 建立吸着数据用内存失败
40F: Failure in creating memory for the Mark data.
40F ： 建立标志数据用内存失败
410: Failure in creating memory for the Extended Mark data.
410 ： 建立扩展标志数据用内存失败
411: Failure in creating memory for the Vision data.
411 ： 建立图像数据用内存失败
412: Failure in creating memory for the Optimization data.
412 ： 建立优化数据用内存失败
413: Failure in creating memory for the Production Management Information.
413 ： 建立生产管理信息用内存失败
414: Failure in creating memory for the Adhesive data.
414 ： 建立粘贴数据用内存失败
415: Failure in creating memory for the Production Condition.
415 ： 建立生产条件用内存失败
416: Failure in creating memory for the Station data.
416 ： 建立站点数据用内存失败
417: Failure in creating memory for the Extended Placement data.
417 ： 建立扩展搭载数据用内存失败
418: Failure in creating memory for the MTC data.
418 ： 建立 MTC 数据用内存失败
419: Failure in creating memory for the MTS data.