Smart Gui - Algorithm Training Material_rev1.pdf - 第13页
Copyright © ViT rox All Rights Reserved . CR T ype Algorithm - Body 13 Eg. for 40% 2. Coplan Location ● T o adjust the location for the coplan inspection boxes. ● The smaller the percentage, The inner the boxes towards t…
Copyright © ViTrox All Rights Reserved.
CR Type Algorithm - Body
12
1. Component Height
● Adjust the component height.
● Right click on the component and select “Update Body
Height” to auto set the body height.
2. Missing Location
● To select the region to inspect the missing defect.
● The choices as follow:
Center Terminal Custom
Can set the
region.
3. Missing Threshold
● Inspection result will prompt out Missing if the component height
is less than the threshold set.
● Missing Thres(um)=[Missing Thres(%)/100]*component Height
Height Missing Thres (um)
Pass
Fail
Copyright © ViTrox All Rights Reserved.
CR Type Algorithm - Body
13
Eg. for 40%
2. Coplan Location
● To adjust the location for the coplan inspection boxes.
● The smaller the percentage, The inner the boxes towards the
centroid
1. Coplan Mode
● To adjust the location for the coplan inspection boxes.
● The choices as follows:
Cross Square
3. Coplan Alternative
● Add another AND relationship coplan alternative which different
in the coplan location.
Both Primary and Alternative
must pass in order to pass
Copyright © ViTrox All Rights Reserved.
CR Type Algorithm - Body
14
1. Coplan Vert Thres (um)
● Tick this to enable the vertical direction for coplan inspection.
● Inspection result will prompt out Coplan if the absolute difference
between the opposite boxes in vertical direction is more than the
threshold set.
2. Coplan Horiz Thres (um)
● Tick this to enable the horizontal direction for coplan inspection.
● Inspection result will prompt out Coplan if the absolute difference
between the opposite boxes in horizontal direction is more than
the threshold set.
Coplan Thres (um)
Pass
Fail