Smart Gui - Algorithm Training Material_rev1.pdf - 第201页
Copyright © ViT rox All Rights Reserved . U-type Locator - 3D Box to Box 201 1. Box Size & Box Offset ● T o adjust the inspection box size & inspection box offset 2. Follow Locator ● Tick this to let the inspecti…
Copyright © ViTrox All Rights Reserved.
U-type Locator - 3D Box to Box
200
1. Box Size & Box Offset
● To adjust the inspection box size & inspection box offset
2. Follow Locator
● Tick this to let the inspection box follow the locator.
3. Min Thres Checking
● To set the error code when min height checking fail.
4. Min Thres Value
● To set the minimum Height value
5. Max Thres Checking
● To set the error code when min height checking fail.
6. Max Thres Value
● To set the maximum Height value
7. Solder Ball Profile
● Tick This when use this algo to inspect solder ball.
Height Measured
Min Height
Max Height
Pass
FailFail
3D Single Box
Copyright © ViTrox All Rights Reserved.
U-type Locator - 3D Box to Box
201
1. Box Size & Box Offset
● To adjust the inspection box size & inspection box offset
2. Follow Locator
● Tick this to let the inspection box follow the locator.
3. Mirror Box Position
● Tick this to let the two inspection box in mirror position.
4. Absolute Difference
● Tick this to enable absolute difference between height measured
5. Apply Warpage Compensation
● Tick this to enable warpage compensation
6. Min Thres Checking
● To set the error code when min height checking fail.
7. Min Thres Value
● To set the minimum Height value
8. Max Thres Checking
● To set the error code when min height checking fail.
9. Max Thres Value
● To set the maximum Height value.
Height Measured
Min Height
Max Height
Pass
FailFail
3D Box to Box
Copyright © ViTrox All Rights Reserved.
U-type Locator - 3D Box to Box
202
3D Box to 4 Boxes
1. Box Size & Box Offset
● To adjust the inspection box size & inspection box offset
2. Follow Locator
● Tick this to let the inspection box follow the locator.
3. Absolute Difference
● Tick this to enable absolute difference between height measured
4. Min Thres Checking
● To set the error code when min height checking fail.
5. Min Thres Value
● To set the minimum Height value
6. Max Thres Checking
● To set the error code when min height checking fail.
7. Max Thres Value
● To set the maximum Height value.
Height Measured
Min Height
Max Height
Pass
FailFail