Smart Gui - Algorithm Training Material_rev1.pdf - 第214页

Copyright © ViT rox All Rights Reserved . U-type Algorithm - 3D Multijoint 214 a. Lead Relocating Mode ● Lead relocation is used to relocate the lead by using lead box after locate body successfully . ● This feature will…

U-type Algorithm - 3D Multijoint

213

a. Geometry Lock

● To enable the box offset into symmetric direction only.

b. Follow Locator

● Tick this to enable the inspection boxes to follow the body

locator and lead relocation feature.

c. Pad

● Auto: Select this if u have the epad information.

● Manual: Select this to manual add in the pad location.

d. Direction

e. No. of pins

● To define the numbers of inspection boxes for pins.

f. Pitch (um)

● To set the distance between pins.

g. Lead Size & Lead Offset

● To adjust the sizes and the offset for lead inspection boxes.

Horizontal

Vertical

U-type Algorithm - 3D Multijoint

214

a. Lead Relocating Mode

● Lead relocation is used to relocate the lead by using lead box

after locate body successfully.

● This feature will increase cycle time.

b. Tip Length (%)

● The lead tip location is always fall at the end of lead box from

the direction body box to lead box

● Tip Length is the selected region to inspect lifted lead and

missing lead

U-type Algorithm - 3D Multijoint

215

a. Lead Height (um)

● Lead relocation is used to relocate the lead by using lead box

after locate body successfully.

● This feature will increase cycle time

b. Lifted Lead Inspection

● Relative - Software will calculate the average height for each

lead and used it as the reference height for lifted lead

inspection.

● Absolute - Lead Height (um) that we keyin will be used as the

reference height for lifted lead inspection.