Smart Gui - Algorithm Training Material_rev1.pdf - 第65页

Copyright © ViT rox All Rights Reserved . 65 B-type Algorithm - Joint 6. Tip Length (%) ● The lead tip location is always fall at the end of lead box from the direction body box to lead box ● T ip Length is the selected …

B-type Algorithm - Joint

1. Pad Mode

● Auto: Select this if you have epad & epin informations.

● Manual: Select this to self define the pad location.

2. Lead Direction

● To select the direction for lead .

● Either in horizontal or vertical.

3. Number of Leads

● To define the number of lead.

4. Lead Pitch

● To define the distance between 2 leads.

5. Lead Relocation

● Lead relocation is used to relocate the lead by using lead box

after locate body successfully.

● This feature will increase cycle time..

B-type Algorithm - Joint

6. Tip Length (%)

● The lead tip location is always fall at the end of lead box from

the direction body box to lead box

● Tip Length is the selected region to inspect lifted lead and

missing lead

B-type Algorithm - Joint

7. Lead Height (um)

● To pre set the height for the lead.

● Need to use this value during lifted lead inspection.

8. Lifted Lead Inspection

● Relative - Software will calculate the average height for each

lead and used it as the reference height for lifted lead

inspection.

● Absolute - Lead Height (um) that we keyin will be used as the

reference height for lifted lead inspection.