Smart Gui - Algorithm Training Material_rev1.pdf - 第58页

Copyright © ViT rox All Rights Reserved . B-type Algorithm - Body 58 1. 3D Geometry Measure ● T ick this to enable the 3D Damaged inspection. ● Consists of minimum/maximum measure for length/width. ● Unit can be in % or …

B-type Algorithm - Body

h. 3D Damaged Inspection

● Tick this to enable 3D Damaged Inspection

i. Damaged Location

● To adjust the location for the damages inspection boxes.

● The smaller the percentage, The inner the boxes towards the centroid

j. Damaged Thres

● Software will check the height of these 4 boxes, the component will fail as

“Damaged” if the absolute height different between any one of the ROI's height

and component height higher than damaged threshold.

Damaged Thres (um)

Measured Height - Reference Height

FAIL

PASS

B-type Algorithm - Body

1. 3D Geometry Measure

● Tick this to enable the 3D Damaged inspection.

● Consists of minimum/maximum measure for length/width.

● Unit can be in % or um.

2. Min Length Measure

a. Disable to off this inspection.

b. Unit in %

● If Expected component length = 1000um & Min Length Thres set

to 50%

● Fail when Measured Length < 1000um - [1000um*(50/100)]

c. Unit in um

● If Expected component length = 1000um & Min Length Thres set

to 100um

● Fail when Measured Length < 1000um - 100um

B-type Algorithm - Body

3. Max Length Measure

a. Disable to off this inspection.

b. Unit in %

● If Expected component length = 1000um & Max Length Thres

set to 50%

● Fail when Measured Length > 1000um + [1000um*(50/100)]

c. Unit in um

● If Expected component length = 1000um & MAx Length Thres

set to 100um

● Fail when Measured Length > 1000um + 100um