Smart Gui - Algorithm Training Material_rev1.pdf - 第39页

6. Paste Fail As

● 3 choices for error message to prompt out during fail.

7. Pass Criteria

● To set number of box require to pass.

● This setting always refer to the box mode set.

● 1 Box: At least one box Need to Pass.

● 2 Boxes: At least 2 boxes Need to Pass

● 3 Boxes: All Need to Pass

CR Type Algorithm - Joint (Side Fillets Inspection)

8. Toe size / Toe Offset / Side Size / side Offset

● To adjust the sizes & offset for the Side Fillet Boxes

● Can drag the boxes to change the size and offset.

Foreign Material Inspection

CR Type Algorithm - Foreign Material

1. Foreign Object Detection

● 3 modes as follows:

● On & On (with mask Display) having the same inspection results.

2. Height Thres (um)

● Minimum height to detect the foreign material

3. Grey Thres

4. Size Thres (um)

● Minimum length and width to detect the foreign material.

Grey Thres

Measured Grey Thres

PASS FAIL

5. Mask Width Expand (um) & Mask Length Expand (um)

● To adjust the mask area size.

● Mask area = Area without inspection

● The green box is the masking area.