Smart Gui - Algorithm Training Material_rev1.pdf - 第213页

Copyright © ViT rox All Rights Reserved . U-type Algorithm - 3D Multijoint 213 a. Geometry Lock ● T o enable the box offset into symmetric direction only . b. Follow Locator ● Tick this to enable the inspection boxes to …

U-type Algorithm - 2D Multi Joint

212

a. Bridge Inspection

● Tick this to enable the Bridge Inspection.

b. Bridge Size & Bridge Offset

● To adjust the size of Bridge Inspection Box & offset of Bridge

Inspection Box

c. Bridge Follow Locator

● Tick this to enable the Bridge Inspection Box to follow the locator.

d. Bridge Image Plane

● These are the types of 2D Lighting. Select the one with having

highest contrast among pin region and the background.

e. 2D Bridge Grey Thres

f. 2D Bridge Width Percent

● To set the width percentage to fail the Bridging Inspection

2D Bridge Gray

Threshold

Pass Fail

Width

U-type Algorithm - 3D Multijoint

213

a. Geometry Lock

● To enable the box offset into symmetric direction only.

b. Follow Locator

● Tick this to enable the inspection boxes to follow the body

locator and lead relocation feature.

c. Pad

● Auto: Select this if u have the epad information.

● Manual: Select this to manual add in the pad location.

d. Direction

e. No. of pins

● To define the numbers of inspection boxes for pins.

f. Pitch (um)

● To set the distance between pins.

g. Lead Size & Lead Offset

● To adjust the sizes and the offset for lead inspection boxes.

Horizontal

Vertical

U-type Algorithm - 3D Multijoint

214

a. Lead Relocating Mode

● Lead relocation is used to relocate the lead by using lead box

after locate body successfully.

● This feature will increase cycle time.

b. Tip Length (%)

● The lead tip location is always fall at the end of lead box from

the direction body box to lead box

● Tip Length is the selected region to inspect lifted lead and

missing lead