00198661-02_UM_SX12-V3_EN.pdf - 第114页
3 Technical data and assemblies I nstruction manual SIPLACE SX1/S X2 Edition V2 and V3 3.5 Dimensions and weight From so ftware version SC.713.1 Edition 12/2020 114 3.5.5 SX1/SX2 placement machine center of gravity 3 Fig…
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 3 Technical data and assemblies
From software version SC.713.1 Edition 12/2020 3.5 Dimensions and weight
113
3.5.4 Maneuvering distance for the component trolley on SIPLACE SX1/SX2
3
Fig. 3.5 - 3 Maneuvering distance for the component trolley on SX1/SX2 placement machines
The maneuvering radii "R" for the component trolley in SX1/SX2 placement machines is:
3
3
Location 1 (outside) Location 2 (inside)
Maneuvering radius R 760 mm 760 mm
Distance L1: Machine center to
outer edge of component trolley
1300 mm 1175 mm
Distance L2: Machine center to
wall
2060 mm 1935 mm
3 Technical data and assemblies Instruction manual SIPLACE SX1/SX2 Edition V2 and V3
3.5 Dimensions and weight From software version SC.713.1 Edition 12/2020
114
3.5.5 SX1/SX2 placement machine center of gravity
3
Fig. 3.5 - 4 Center of gravity for SX1/SX2 placement machines in millimeters
X coordinate 0 mm
Y coordinate 0 mm
Z coordinate 738.5 mm
These center of gravity coordinates relate to placement machines with a PCB conveyor height of
900 mm.
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 3 Technical data and assemblies
From software version SC.713.1 Edition 12/2020 3.6 Overviews of the modules
115
3.6 Overviews of the modules
3.6.1 Overview of SIPLACE SX2 V3 assemblies
3
3
Fig. 3.6 - 1 SIPLACE SX2 V3-placement machine - overview of assemblies
(1) Basic module
(2) Robot module
(3) Gantry 2 with placement head
(4) PCB conveyor (single or dual conveyor)
(5) Gantry 1 with placement head
(6) Multitouch monitor
(7) Component trolley at location 1
(8) Location 2 with COT insert, tape cutter, empty tape duct
(T) Direction of PCB transport
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(6)
(8)