00198661-02_UM_SX12-V3_EN.pdf - 第127页
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 3 Technical data and assemblies From software version SC.713.1 Edition 12/2020 3.7 Placement head 127 3.7.4.4 Description Only the SIPLACE S peedStar can be operated w…
3 Technical data and assemblies Instruction manual SIPLACE SX1/SX2 Edition V2 and V3
3.7 Placement head From software version SC.713.1 Edition 12/2020
126
3.7.4.2 Overview - type VX4.25/0-47 IE3
Item no. 03224400-xx Vacuum pump VX4.25/0-47 IE3
3
Fig. 3.7 - 4 Overview - vacuum pump
(1) Installation location for vacuum pump
(2) Vacuum pump VX 4.25 IE3
3.7.4.3 Safety instructions for vacuum pumps
3
(1)
(2)
WARNING
Observe the safety instructions
Please observe the safety instructions in the instruction manual supplied.
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 3 Technical data and assemblies
From software version SC.713.1 Edition 12/2020 3.7 Placement head
127
3.7.4.4 Description
Only the SIPLACE SpeedStar can be operated with the vacuum pump. The SIPLACE SpeedStar
with vacuum pump is available as an option for the SIPLACE SX1/SX2 .
When operated together with a vacuum pump, the compressed air consumption for the SpeedStar
C&P20 P2 / C&P20 P head can be reduced considerably. A vacuum pump can supply up to two
SpeedStar C&P20 P2 /C&P20 P heads. The running costs will fall according to the energy costs
incurred.
The vacuum pump is switched on and off with the placement machine. The station software auto-
matically takes into account an overrun time of 6 minutes, to prevent the motor overheating.
3
3.7.4.5 Maintenance instructions
Observe the additional maintenance instructions for the vacuum pump.
Read the relevant section in the maintenance manual for your placement machine.
PLEASE NOTE
The compressed air consumption values can be found in section 3.4, page 107.
3 Technical data and assemblies Instruction manual SIPLACE SX1/SX2 Edition V2 and V3
3.7 Placement head From software version SC.713.1 Edition 12/2020
128
3.7.5 SIPLACE MultiStar CPP
3
3
Fig. 3.7 - 5 SIPLACE MultiStar CPP - front view, function groups part 1
(1) Handle
(2) Star with 12 segments
(3) Segment with integrated DP drive
CAUTION
Always take hold of the handle to push the placement head
The placement head may only be moved by pushing manually against the handle provid-
ed.
(2)
(3)
(1)