00198661-02_UM_SX12-V3_EN.pdf - 第59页

Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 2 Operation al safety From software version SC.713 .1 Edition 12/2020 2.2 Warning labels 59 2.2.10.1 High temperatures on the SIPLACE CPP 2 1 in fig. 2.2 - 13 , page 5…

100%1 / 366
2 Operational safety Instruction manual SIPLACE SX1/SX2 Edition V2 and V3
2.2 Warning labels From software version SC.713.1 Edition 12/2020
58
2.2.10 Warning labels on the SIPLACE MultiStar CPP
2
Fig. 2.2 - 13 Warning labels on the SIPLACE MultiStar CPP
(1) Temperature label, item no. 03031926-01
Item laser mark - risk class 2, item no. 03155298-01
(1)
Laser mark, risk class
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 2 Operational safety
From software version SC.713.1 Edition 12/2020 2.2 Warning labels
59
2.2.10.1 High temperatures on the SIPLACE CPP
2
1 in fig. 2.2 - 13, page 58 (quantity per SIPLACE CPP: 1)
2.2.10.2 Laser class 2 on the component sensor
2
Item W laser class 2 in fig. 2.2 - 13, page 58, item no. 03134118-01 (quantity per CPP: 1)
2
High temperatures on the SIPLACE CPP during continuous operation
Risk of burns due to high temperatures!
The
Z drive (linear motor) can develop high surface temperatures during
continuous operation, if the ambient temperature is greater than 22°C.
Be careful when touching the parts.
2
2
2
LASER RADIATION
Laser class 2
Acc. to IEC 60825-1:2014
Do not look into beam!
2 Operational safety Instruction manual SIPLACE SX1/SX2 Edition V2 and V3
2.2 Warning labels From software version SC.713.1 Edition 12/2020
60
2.2.11 High temperatures on the Head Control Unit (MHCU)
1 in fig. 2.2 - 14, page 60 temperature label, item no. 03031926-01 (2 to 4, depending on head
configuration).
2
Fig. 2.2 - 14 Temperature label on the Head Control Unit (MHCU)
2
RISK OF BURNS DUE TO HIGH TEMPERATURES!
The housing of the Head Control Unit (MHCU) can become hot during con-
tinuous operation. Take care when touching the Head Control Unit (MHCU).
(1)
(1)