00198661-02_UM_SX12-V3_EN.pdf - 第228页

4 Setting up and commissioning Instruction manual SIPLACE SX1/SX 2 Edition V2 and V3 4.6 Commissioning the placement m achine From software version SC .713.1 Edition 12/2020 228

Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 4 Setting up and commissioning

From software version SC.713.1 Edition 12/2020 4.6 Commissioning the placement machine

227

4.6.2 Instructing the customer's personnel

 Explain all customer-specific installed options, in particular software / software compatibility.

 Explain the programming of SIPLACE Pro editors.

 Instruct the operators and line engineers in using the station software.

 Explain about password protection.

 Instruct the customer's personnel according to the instruction manual and the preventive

maintenance.

4.6.3 A test run or starting production

 Test the line using the test PCB or a PCB provided by the customer.

 Record the customer product and performance data, prepare the data and document the data

in the installation report.

 Secure the data and give the customer security copies.

4 Setting up and commissioning Instruction manual SIPLACE SX1/SX2 Edition V2 and V3

4.6 Commissioning the placement machine From software version SC.713.1 Edition 12/2020

228

Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 5 Tasks at the placement machine

From software version SC.713.1 Edition 12/2020 5.1 Staff profiles

229

5 Tasks at the placement machine

This chapter contains a number of subjects that are intended to help you during your daily work

on a SIPLACE line. For example, you are provided with preventative measures that you can take

to minimize the down time on the machine to obtain the highest possible level of efficiency for the

SIPLACE line during production.

5.1 Staff profiles

Certain functions or menus may only be executed or can only accessed by specially trained per-

sonnel. A differentiation is made between the following operator levels:

– Production

– Advanced production

– Service (customer)

The operator levels "Advanced production" and "Service (customer)" can be password protected.

PLEASE NOTE

Correct usage with qualified personnel

Incorrect usage poses a risk to life and limb and a risk of damage to equipment.

 Only appropriately qualified personnel may put the placement machine into opera-

tion, operate it or perform work to the placement machine. For more information, refer

to section 1.3.6

, page 26.

 Evidence of these qualifications must be obtained in training or instructions of per-

sonnel. These instructions must be given by personnel trained and authorized by SI-

PLACE. For an overview of the training courses, refer to section 1.4

, page 28.