00198661-02_UM_SX12-V3_EN.pdf - 第28页
1 Introduction Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 1.4 Qualification and training of personnel From software versio n SC.713.1 Edition 12/2020 28 1.4 Qualification and training of personnel Personnel us …
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 1 Introduction
From software version SC.713.1 Edition 12/2020 1.3 Placement machine description
27
1.3.8 Important information about environmentally-friendly disposal
SIPLACE placement machines are preferably manufactured using materials and parts that can be
easily separated and disposed of in an environmentally-friendly way.
1
1.3.9 Electromagnetic compatibility (EMC)
SIPLACE placement machines are designed and tested for professional use in industrial applica-
tions. Electromagnetic compatibility in terms of the emission of interference cannot be guaranteed
in any other environment.
1.3.10 Note on original SIPLACE accessories
1
PLEASE NOTE
Proper, environmentally-friendly disposal
The owner of the system has sole responsibility for the proper environmentally-friendly
disposal of machines, working materials, consumables and wear parts.
Please observe your national statutory provisions for waste disposal and environ-
mental protection.
PLEASE NOTE
Use of original spare parts and authorized accessories
The use of other parts will affect safety and will invalidate the liability for any consequen-
tial damage.
Only use original spare parts and authorized accessories from ASM Assembly Sys-
tems GmbH&Co.KG.
1 Introduction Instruction manual SIPLACE SX1/SX2 Edition V2 and V3
1.4 Qualification and training of personnel From software version SC.713.1 Edition 12/2020
28
1.4 Qualification and training of personnel
Personnel used for operation, preventive maintenance, inspection and installation must hold the
relevant qualifications for the job. The user must keep tight control over their responsibilities, as-
signment and supervision. Any employee who does not have the relevant training must be trained
and given appropriate instruction. The instruction is to be given by trained and authorized person-
nel.
SMT Academy
The SMT Academy provides technical training courses for your team, covering everything from
basic SIPLACE operator training to advanced follow-up training for your experts. Our courses can
either be held at your company or at one of our SIPLACE training centers worldwide. In addition
to our range of standard training programs, we can also offer customized courses to meet your
individual requirements.
SIPLACE training courses are always on a modular basis. This means that you can either book a
standard course or compile your own training program with the individual topics required for your
production environment.
1
1
Training courses for SIPLACE SX
Special operator, maintenance and technical (system configuration and repairs) training courses
are available for the SIPLACE SX.
Standard courses
– SIPLACE operator training
– SIPLACE technical training for SX
Follow-up courses and customized
courses
– SIPLACE SX upgrade training modules
– Customized training available on request
Other training courses
– SIPLACE programmer training for SIPLACE
Pro
– SIPLACE Vision Training
– SIPLACE feeder care training
– SIPLACE placement heads - modular training
units
PLEASE NOTE
Operation of system only by qualified personnel
Only staff with the relevant qualifications may start up, operate or otherwise work on
the placement machine.
The qualification must be proven by means of training courses or instruction for the per-
sonnel.
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 1 Introduction
From software version SC.713.1 Edition 12/2020 1.5 Operator levels
29
1.5 Operator levels
Certain functions or menus may only be executed or accessed by specially trained personnel. A
differentiation is made between the following operator levels:
– Production
– Advanced production
– Service (customer)
The operator levels "Advanced production" and "Service (customer)" can be password protected.
Production 1
This operator level includes those people who have been trained to operate the placement ma-
chine. These people are authorized to use any functions associated with operating the placement
machine and may access any menus needed to use the machine.
Advanced production 1
People with this operator level have completed special training and are authorized to perform
setup tasks e.g. creating setup configurations or determining Vision parameters etc.
Service (customer) 1
People with this operator level are specially trained technicians at the customer end, who can, for
example, define machine option settings.