00198661-02_UM_SX12-V3_EN.pdf - 第161页

Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 3 Technical data and assemblies From software version SC.713.1 Edition 12/2020 3.10 X feeder modu les 161 3.10.3 Linear Dipping Unit 2 X (LDU 2 X) Item no. 001 17012-x…

100%1 / 366
3 Technical data and assemblies Instruction manual SIPLACE SX1/SX2 Edition V2 and V3
3.10 X feeder modules From software version SC.713.1 Edition 12/2020
160
3.10.2.2 Technical data
Length 584.9 mm
Height 199.5 mm
Width 57.6 mm
Feeder module locations filled 5 tracks, each with 8 mm
Weight 4.6 kg
Diameter of smallest possible individual droplet
*a
*)a at 100 µm nozzle diameter and use of Heraeus PD 205A-Jet glue (at 53°C) or Loctite 3621 (at 53°C)
0.7 - 0.8 mm (+/- 0.1 mm)
Diameter of droplet formed from 5 shots
a
1.0 mm (+/- 0.2 mm)
Height of individual droplets
a
0.15 mm (+/- 0.02 mm)
Height of droplet formed from 5 shots
a
0.2 - 0.3 mm
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 3 Technical data and assemblies
From software version SC.713.1 Edition 12/2020 3.10 X feeder modules
161
3.10.3 Linear Dipping Unit 2 X (LDU 2 X)
Item no. 00117012-xx Linear dip module for flux / LDU 2 X
The LDU 2 X is a special feeder module, which can make flux available with a defined layer thick-
ness. This flux can be used to coat components, thereby improving their solder properties. The
LDU 2 X is set up on the changeover table in the same way as an X feeder module and is con-
trolled via the station software and line software.
For a detailed description, refer to the user guide "SIPLACE LDU 2 X".
3
Fig. 3.10 - 4 Linear Dipping Unit (LDU 2 X)
3.10.3.1 Technical data
Dimensions (L x W x H) 629 mm x 105 mm x 202 mm
Weight 11 kg
Current consumption 24 V dc bis 30 V dc, 2 A (60 W)
Max. noise emissions 61dB (A)
Temperature range (storage) Between -25°C and +55°C
Temperature range (operation) Between +18°C and +25°C
Humidity (storage) ≤ 95%
Humidity (operation) 30% - 75% (on average not > 45%)
3 Technical data and assemblies Instruction manual SIPLACE SX1/SX2 Edition V2 and V3
3.10 X feeder modules From software version SC.713.1 Edition 12/2020
162
3.10.4 Feeder module adapter
Item no. 00141305-xx adapter for feeder modules X
Item no. 00141308-xx Adapter plate for reject conveyor
Item no. 00141310-xx Adapter plate for label presenter
3
The spectrum of X tape feeder modules has been extended to include the linear vibratory feeder,
the label presenter and the reject conveyor. With an adapter, you can also convert the S linear
vibratory feeder, label presenter and reject conveyor for use with SX1/SX2 component trolleys.
The adapter performs electronic as well as mechanical functions: It converts the communication
signals from the S feeder modules into signals conforming to the extended X-Series protocol. Ad-
ditional functions, such as feeder module identification, have also been implemented.
3
PLEASE NOTE
S linear vibratory feeders, label presenters and reject conveyors can not be set up at com-
ponent trolleys if these are in the access range of a SpeedStar (C&P20).