00198661-02_UM_SX12-V3_EN.pdf - 第259页

Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 5 Tasks at the placement machine From software version SC.713.1 Edition 12/2 020 5.8 Shift changeov er 259 5.8 Shif t changeover 5.8.1 Shif t changeover t asks  S pli…

5 Tasks at the placement machine Instruction manual SIPLACE SX1/SX2 Edition V2 and V3

5.7 Indicator lamps with horn From software version SC.713.1 Edition 12/2020

258

5.7.2.4 Indicator lamp with audio signal - five color (optional for SIPLACE SX1/SX2 V3)

The sequence of colors for the indicator lamps L1 to L5 can be configured as wished: These lamps

are used to signal operating statuses and malfunctions of the placement machine. See also

Sec-

tion 5.7 on page 254

Fig. 5.7 - 5 Indicator lamps for operating states

(L2)

(L1)

(L3)

(L4)

(L5)

Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 5 Tasks at the placement machine

From software version SC.713.1 Edition 12/2020 5.8 Shift changeover

259

5.8 Shift changeover

5.8.1 Shift changeover tasks

 Splice the tapes early. The feeder modules do not have to be refilled as soon as the new shift

starts. This minimizes extended down times.

 At the shift change, pass important information on to the next operator. This includes, for in-

stance, changes to the placement program. Also read through the list of the descriptions of

the steps to take in section 5.12

, page 279.

 Carry out a setup check.

Make sure that the feeder modules are equipped with the correct components, that they are

at the correct locations in the component trolley and that the conveyor increment is set cor-

rectly.

Clean the following line assemblies:

 Empty the reject bin and carefully vacuum the area around the reject bin.

 Carefully vacuum the nozzle changer, feeder modules and the component trolley.

 Empty the waste tape container. Follow the safety instructions given in section 5.8.2, page

260

 Empty the tray for the machine cover.

5 Tasks at the placement machine Instruction manual SIPLACE SX1/SX2 Edition V2 and V3

5.8 Shift changeover From software version SC.713.1 Edition 12/2020

260

5.8.2 Safety instructions for emptying the waste tape container

Fig. 5.8 - 1 Safety instructions for emptying the waste tape container

(1) Handle

(2) Waste tape container

The waste tape container must be pulled out of the component trolley for emptying. There is a risk

of catching your fingers as you do so.

 To avoid any risks, always use the handle recess to take hold of the waste tape container

(

item 1).

 Do NOT put your fingers in the gap between the tape container and waste tape container as

you could catch your fingers if you do.

(1)

(2)