00198661-02_UM_SX12-V3_EN.pdf - 第208页
4 Setting up and commissioning Instruction manual SIPLACE SX1/SX 2 Edition V2 and V3 4.3 Setting up the placement machine From software version SC.71 3.1 Edition 12/2020 208 4.3.6 Replacing machine feet (height adapter) …
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 4 Setting up and commissioning
From software version SC.713.1 Edition 12/2020 4.3 Setting up the placement machine
207
4.3.5 Tools and equipment
You will need the following tools and equipment to adjust the height of your placement machine:
– Combination wrench size 19, Item No. 03111261-01 (new)
– Or, optionally: Open double-ended ring spanner, size 20, Item No. 03080496-01
– Torque wrench with setting scale, Item No. 03080498-01 and extension 1/2 inch, Item No.
03080499-01
– Hexagonal screwdriver bit, size 12 Item No. 03080501-01
– Hexagonal screwdriver bit, size 14 Item No. 03080502-01
– Allen key, for hexagon socket head screws for fixing the machine feet with a grub screw
– Shaft spirit level (accuracy 0.02 mm/m), item no. 00353825-01
– Measuring device for machine alignment, Item No. 03075826-01
as support for the shaft spirit level used to align the gantries.
4
– SX machine alignment gauge 2 assembly, item no. 03077785-01
– SX machine alignment gauge 1 assembly, item no. 03077777-01
for alignment to the PCB conveyors in the line
4
– Fork lift truck (specification see 4.1.4.3 on page 186).
– Air cushion transport system: SIPLACE HSxx, Item No. 00119002-S01 (optional)
4 Setting up and commissioning Instruction manual SIPLACE SX1/SX2 Edition V2 and V3
4.3 Setting up the placement machine From software version SC.713.1 Edition 12/2020
208
4.3.6 Replacing machine feet (height adapter)
The placement machine stands on 4 feet (height adapter) (see item 1 in fig. 4.3 - 2, page 208)
The corresponding height adapters are available for the various PCB conveyor heights.
4
Fig. 4.3 - 2 Height adapter for placement machine
(1) Hexagon socket head screw for height adjustment
(2) Notch for fixture against falling (locking screw)
(3) Various height adapter dimensions
– Height adapter for PCB conveyor height 900 (Item No. 03067048-xx)
– Height adapter for PCB conveyor height 930 (Item No. 03067046-xx)
– Height adapter for PCB conveyor height 950 (Item No. 03065876-xx)
(3)
(1)
(2)
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 4 Setting up and commissioning
From software version SC.713.1 Edition 12/2020 4.3 Setting up the placement machine
209
4
Fig. 4.3 - 3 Machine feet (height adapter) for placement machine
(1) 4 height adapters - for various heights
Push the forks of the fork lift under the placement machine. See also 4.3.2, on page 204.
With the fork-lift, raise the placement machine approximately 35 cm. You can now pull the
height adapters down and out.
(1)
(1)
(1)