00198661-02_UM_SX12-V3_EN.pdf - 第304页

6 Station extensions Instructio n manual SIPLACE SX1/SX2 Edition V2 and V3 6.1 Nozzle changer From software version SC.713.1 Edition 12/2020 304 6.1.4.3 Position of the nozzle changer for the SIPLACE T winSt ar 6 Fig. 6.…

100%1 / 366
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 6 Station extensions
From software version SC.713.1 Edition 12/2020 6.1 Nozzle changer
303
6.1.4.2 Technical data
6
6
Nozzle changer for the SIPLACE TwinStar
Number of magazines Max. 8 magazines for 16 nozzle garages
Number of nozzle holders may be freely configured
Standard configuration 3 magazines with two nozzle garages each
1 magazine with one nozzle garage
Nozzle types 4 xx with adapter
5xx (standard)
9 xx with adapter
Special nozzle, gripper
6 Station extensions Instruction manual SIPLACE SX1/SX2 Edition V2 and V3
6.1 Nozzle changer From software version SC.713.1 Edition 12/2020
304
6.1.4.3 Position of the nozzle changer for the SIPLACE TwinStar
6
Fig. 6.1 - 11 Position of nozzle changer for the SIPLACE TwinStar - example
6
(1) Component trolley 60 in the inner position
(2) Component trolley 30 in the outer position
(NC) Nozzle changer
(PA) Placement area
(1)
(2)
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 6 Station extensions
From software version SC.713.1 Edition 12/2020 6.1 Nozzle changer
305
6.1.4.4 Assembly
The nozzle changer is fixed to the COT insert.
6
Fig. 6.1 - 12 Assembly position
(1) Marking hole
(2) Operator side
(3) Arrow pointing toward the PCB conveyor
6
Align the nozzle changer so that the marking hole (item 1) is on the left, as viewed by the op-
erator.
6.1.4.5 Special nozzles
The SIPLACE placement machines process components in accordance with the standard SMT
spectrum.
ASM is continually developing its range of special nozzles.
Special nozzles are available for all placement heads in order to process placement jobs with max-
imum speed, precision and flexibility. The use of automatic nozzle changers also reduces the
setup times that occur at a product change.
For the production of special magazines and grippers, please contact ASM.
6.1.4.6 Component reject bin for the SIPLACE TwinStar
A component reject bin can be installed for the SIPLACE TwinStar. This is positioned next to the
fine pitch Vision module.
(1)
(2)
(3)