00198661-02_UM_SX12-V3_EN.pdf - 第289页

Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 5 Tasks at the placement machine From software version SC.713.1 Edition 12/2020 5.15 Docking the c omponent trolley in or out 289 5 Fig. 5.15 - 6 Component trolley - s…

5 Tasks at the placement machine Instruction manual SIPLACE SX1/SX2 Edition V2 and V3

5.15 Docking the component trolley in or out From software version SC.713.1 Edition 12/2020

288

 Use the height setting for fine adjustment to correct the height of the component trolley. The

two surfaces of the block and the bracket should not quite touch.

 Go to the main view of the station software and select the Feeder module... icon and

then the

Locations icon.

 Click on the icon to lock the respective location and wait until the trolley has docked

completely. For further information, refer to the station software Online Help.

 Push the sleeve up using both handles and swivel the handle

down.

PLEASE NOTE

 Close the protective covers since the component trolley can only be docked in if the

covers are closed.

Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 5 Tasks at the placement machine

From software version SC.713.1 Edition 12/2020 5.15 Docking the component trolley in or out

289

Fig. 5.15 - 6 Component trolley - swivel handles down

(1) Push sleeve up

(2) Fold handle down

(1)

(2)

5 Tasks at the placement machine Instruction manual SIPLACE SX1/SX2 Edition V2 and V3

5.15 Docking the component trolley in or out From software version SC.713.1 Edition 12/2020

290