00198661-02_UM_SX12-V3_EN.pdf - 第341页
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 7 Maintenan ce From software version SC.713.1 Edition 12/2020 7.1 Safety instruc tions for maintena nce work 341 7 7 7 7.1.1 Safety inst ructions f or hazardous substa…
7 Maintenance Instruction manual SIPLACE SX1/SX2 Edition V2 and V3
7.1 Safety instructions for maintenance work From software version SC.713.1 Edition 12/2020
340
7.1 Safety instructions for maintenance work
7
7
7
7
7
CAUTION
Nonobservance of the safety instructions poses a risk of personal injury and also dam-
age to the placement machine!
Observe the safety instructions in chapter 2 Operational safety on page 31 in this
instruction manual when performing any work.
WARNING
Risk of burns
When performing cleaning tasks using inflammable fluids (e.g. alcohol), never use
a naked flame or open light sources.
Never spray lubricants or cleaning agents in spray cans in the vicinity of open light
sources or naked flames.
CAUTION
Ethanol
Always wear protective goggles and gloves when cleaning assemblies with concen-
trated ethanol.
Immediately rinse your eyes with water if you accidentally get any ethanol in your
eyes.
WARNING
SIPLACE cleansing tissue
The SIPLACE cleansing tissue is harmful to your health and could cause damage to your
lungs if swallowed.
Do not breathe in the aerosol/mist.
Avoid contact with the skin. If swallowed, do not induce vomiting. Seek medical ad-
vice immediately and show the packaging or label to the doctor.
Wear latex gloves when using the cleansing tissue.
CAUTION
Observe the safety datasheets for materials
Observe the safety datasheets for materials when handling hazardous substances
(e.g. Loctite 241, ethanol)!
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 7 Maintenance
From software version SC.713.1 Edition 12/2020 7.1 Safety instructions for maintenance work
341
7
7
7
7.1.1 Safety instructions for hazardous substances
7
CAUTION
Cleaning and lubrication
Do not use any solvents for cleaning, use only ethanol!
Alternatively, you can also use isopropanol – IPA.
Cleaning with compressed air inside the placement machine or module assemblies
is expressly prohibited.
CAUTION
Risk of cutting at IC and FC camera
The edges of the mirror could cut your fingers.
Protect yourself by wearing laboratory gloves and avoid touching the edges.
Laboratory gloves are also a prerequisite for effective cleaning (fingerprints!).
CAUTION
Only one person may be in the area of the location at any one time.
The reason for this is to ensure the safety of the operating personnel or of a second per-
son. The two-hand operation of the component trolley insert only enables one person to
be reliably protected from danger.
CAUTION
Observe the safety data sheets
When handling hazardous substances, (e.g. Loctite 241, ethanol) observe the ap-
plicable safety data sheet.
7 Maintenance Instruction manual SIPLACE SX1/SX2 Edition V2 and V3
7.1 Safety instructions for maintenance work From software version SC.713.1 Edition 12/2020
342