00198661-02_UM_SX12-V3_EN.pdf - 第138页

3 Technical data and assemblies I nstruction manual SIPLACE SX1/S X2 Edition V2 and V3 3.7 Placement head From software version SC.713.1 Edition 12/2020 138 3.7.6 SIPLACE T winS t ar for high precision I C placement 3 Fi…

100%1 / 366
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 3 Technical data and assemblies
From software version SC.713.1 Edition 12/2020 3.7 Placement head
137
3.7.5.9 Technical data SIPLACE MultiStar (CPP) on the SIPLACE SX2/SX2 V2
3
3
SIPLACE MultiStar (CPP)
with component camera type
30
with component camera type 33
(stationary camera)
Component range
*a
*)a Please note that the placeable component range is also affected by the pad geometry, the customer-spe-
cific standards, the component packaging tolerances and the component tolerances.
01005 to 27 mm x 27 mm 0402 to 50 mm x 40 mm
*b
*)b A diagonal of 69 mm is possible during multiple measurements (e.g. 64 mm x 10 mm).
Component spec.
Max height
*c
Max. height
*d
Min. lead pitch
Min. lead width
Min. ball pitch
Min. ball diameter
Min. dimensions
Max. dimensions
Max. weight
*)c CPP head: In low installation position (stationary component camera not possible).
*)d CPP head: In high installation position
6.0 mm
8.5 mm
250 µm
100 µm
*e
/ 200 µm
*f
25.0 µm
*e
/ 350 µm
*f
140 µm
*e
/ 200 µm
*f
0.4 mm x 0.2 mm
27 mm x 27 mm
4 g
*g
*)e For components < 18 mm x 18 mm.
*)f For components ≥ 18 mm x18 mm.
*)g 20 g in "Pick&Place" mode
11.5 mm / 15.5 mm
*h
300 µm
150 µm
350 µm
200 µm
1.0 mm x 0.5 mm
50 mm x 40 mm
8 g
*g
Set-down force 1.0 - 15 N
*h
*)h 15.5 mm in high assembly position only, with OSC package and restrictions.
Nozzle types 20xx, 28xx 20xx, 28xx
X/Y accuracy
*i
*)i The accuracy values fulfill the conditions in the SIPLACE scope of supply and services.
± 41 µm/3σ ± 34 µm/3σ
Angular accuracy ± 0.20° / 3σ
*j
, ± 0.38° / 3σ
*k
*)j Component dimensions between 6 mm x 6 mm and 27 mm x 27 mm.
*)k Component dimensions smaller than 6 mm x 6 mm.
± 0.14° / 3σ
Illumination level 5 6
3 Technical data and assemblies Instruction manual SIPLACE SX1/SX2 Edition V2 and V3
3.7 Placement head From software version SC.713.1 Edition 12/2020
138
3.7.6 SIPLACE TwinStar for high precision IC placement
3
Fig. 3.7 - 11 SIPLACE TwinStar for high precision IC placement
3
(1) Pick&Place module 1 (P&P1) - the TwinStar consists of 2 Pick&Place modules
(2) Pick&Place module 2 (P&P2)
(3) DP axis
(4) Z axis drive
(5) Incremental distance measuring system for the Z axis
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 3 Technical data and assemblies
From software version SC.713.1 Edition 12/2020 3.7 Placement head
139
3.7.6.1 Technical data
SIPLACE TwinStar
with component camera type 33
(fine pitch camera)
with component camera type 25
(flip chip camera)
Component range
*a
0402 to SO, PLCC, QFP, BGA, special compo-
nents, bare dies, flip-chips
0201 to SO, PLCC, QFP, sockets,
plugs, BGA, special components, bare
dies, flip-chips, shields
Component specs
Max. height
Min. lead pitch
Min. lead width
Min. ball pitch
Min. ball diameter
Min. dimensions
Max. dimensions
Max. weight
*b
25 mm / 40 mm
*c
300 µm
150 µm
350 µm
200 µm
1.0mm x 0.5mm
55 mm x 45 mm (single measurement)
Up to
200 mm x 125 mm (multiple measurement)
*d
100 g to 160 g
*e
25 mm / 40 mm*
c
250 µm
100 µm
140 µm
80 µm
0.6mm x 0.3mm
16 mm x 16 mm (single measurement)
Up to
55 mm x 55 mm (multiple measure-
ment)*
d
100 g to 160 g*
e
Set-down force 1.0 N - 15 N
1.0 N - 30 N with OSC package
2.0 N - 70 N*
c
2.0 N -100 N
*f
1.0 N - 15 N
1.0 N - 30 N with OSC package
2.0 N - 70 N*
c
2.0 N -100 N*
f
Nozzle types
*g
5xx (standard)
20xx/28xx + adapter
4xx + adapter
9xx + adapter
gripper
5xx (standard)
20xx/28xx + adapter
4xx + adapter
9xx + adapter
gripper
Nozzle spacing for P&P
heads
70.8 mm 70.8 mm
X/Y accuracy
*h
± 26 µm/3σ ± 22 µm/3σ
Angular accuracy ± 0.05° / 3σ ± 0.05° / 3σ
Illumination level 6 6
*)a Please note that the placeable component range is also affected by the pad geometry, the customer-specific standards, the
component packaging tolerances and the component tolerances.
*)b Component plus nozzle or gripper.
*)c Maximum height up to 50 mm with SIPLACE Very High Force Twin Star (VHF TH) and OSC package. possible.
*)d Depending on the component dimensions and component infeed, other restrictions may also apply, which SIPLACE Pro will
automatically take into account.
*)e Up to 100 g is standard. Over 100 g available with reduced acceleration. From 160 g only with SIPLACE Very High Force Twin
Star (VHF TH). See also SIPLACE Very High Force TwinStar (VHF TH) on page 326.
*)f Only with SIPLACE Very High Force Twin Star (VHF TH) and OSC package
*)g Over 300 different nozzles and 100 gripper types are available, with an extensive nozzle database available online.
*)h The accuracy values fulfill the conditions in the SIPLACE scope of supply and services.