00198661-02_UM_SX12-V3_EN.pdf - 第31页
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 2 Operation al safety From software version SC.713.1 Edition 12/2020 2.1 Safety instruc tions 31 2 Operational safety 2.1 Safety instructions 2.1.1 Conventions for the…
1 Introduction Instruction manual SIPLACE SX1/SX2 Edition V2 and V3
1.5 Operator levels From software version SC.713.1 Edition 12/2020
30
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 2 Operational safety
From software version SC.713.1 Edition 12/2020 2.1 Safety instructions
31
2 Operational safety
2.1 Safety instructions
2.1.1 Conventions for the use of hazard symbols
This instruction manual contains notes that must be observed to guarantee your personal safety
and to avoid damage to equipment. These notes are highlighted by warning triangles and are in-
dicated as follows according to the level of risk:
2
2
2
2
DANGER
Definition
Danger, as used in this instruction manual, means that death, severe injury or consider-
able damage to equipment will occur if the danger instructions are not followed.
WARNING
Definition
Warning, as used in this instruction manual, means that death, severe injury or consider-
able damage to equipment may occur if the warning instructions are not followed.
CAUTION
Definition
Caution, as used in this instruction manual, means that slight injury or damage to equip-
ment may occur if the caution instructions are not followed.
PLEASE NOTE
Definition
A note, as used in this instruction manual, provides information on the product or indicates
a part of the instruction manual that requires particular attention.
2 Operational safety Instruction manual SIPLACE SX1/SX2 Edition V2 and V3
2.1 Safety instructions From software version SC.713.1 Edition 12/2020
32
2.1.2 Qualified personnel
Qualified or adequately trained personnel means that these people are familiar with the setting up,
operation and preventive maintenance of placement machines and add-on devices and are suit-
ably qualified, e.g.
– have been trained, instructed or authorized to switch on and off, isolate, earth and identify
electrical circuits and system components in accordance with normal safety standards.
– have been trained or instructed in the upkeep and use of appropriate safety equipment in ac-
cordance with normal safety standards.
2.1.3 Important notes on operational safety
The following points MUST be observed in order to maintain operational safety:
2.1.3.1 General
The operational safety of SMD placement machines can be guaranteed only if the system is
used as prescribed and in accordance with the instructions in the user/preventive mainte-
nance manuals.
Always follow any safety regulations specific to your country.
Make sure that the warning labels are always clearly identifiable and always easily readable.
Replace any damaged warning or notice labels. Replace any labels that are missing.
The machine key for releasing the covers on the placement machine must be kept in a safe
place where it is only accessible to qualified staff.
2
If it is necessary to work on the machine and you do not have adequately trained personnel
within your operation, always call in a ASM Assembly Systems GmbH&Co.KG service engi-
neer! ASM Assembly Systems GmbH&Co.KG will not accept liability for any damage or con-
sequential damage that is the result of unauthorized/incorrect work.
PLEASE NOTE
Owner's responsibility
The machine owner, and only the machine owner, is responsible for the safekeeping of
the machine key and for ensuring that it is handed over to authorized persons.