00198661-02_UM_SX12-V3_EN.pdf - 第17页
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 1 Introduct ion From software version SC.713.1 Edition 12/2020 1.1 Important note s on the instruction manual 17 1.1.5 Further information about and content s of the d…
1 Introduction Instruction manual SIPLACE SX1/SX2 Edition V2 and V3
1.1 Important notes on the instruction manual From software version SC.713.1 Edition 12/2020
16
1.1 Important notes on the instruction manual
1.1.1 Contents and filing of the instruction manual
This instruction manual contains basic information that must be observed when setting up, oper-
ating and maintaining the machine. The service engineers, qualified staff, operators and users
plus system owner must therefore read it before commencing installation and commissioning. The
instructions must be kept permanently accessible where the placement machine is used.
In addition, the user must ensure that the employees have fully understood the contents of the
instruction manual.
1.1.2 Danger notes
1
1.1.3 Manufacturer's/supplier's liability
We hereby confirm that the contents of this instruction manual are of a descriptive and explanatory
nature only and do not contain any contractual conditions or guaranties. The liability and obliga-
tions assumed by ASM Assembly Systems GmbH&Co.KG can be found exclusively in the rele-
vant contract agreement concerning the supply of the placement machine described in this
manual. This applies in particular to all statements regarding performance or service life and the
agreed liability for faults or defects. The provisions of the contract regarding the liability for faults
or defect are neither extended nor restricted by any statements in this instruction manual.
1.1.4 Revision table
1
WARNING
Read the instruction manual!
Tasks may only be performed by qualified staff who have completed the relevant
training.
Only perform tasks on the placement machine if you have precise knowledge of the
relevant section in the instruction manual.
Observe all warnings, caution notes and hazard notes.
Please also read chapter 2 of this instruction manual through carefully.
Edition Amendments
04/2020 – First edition with SC.713.1
12/2020 – Safety valve on the tape cutter for SX1/SX2 Edition V3
– Minor corrections and supplements
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 1 Introduction
From software version SC.713.1 Edition 12/2020 1.1 Important notes on the instruction manual
17
1.1.5 Further information about and contents of the documentation package
1.1.5.1 How to get information
If you have any further questions concerning this manual or if you would like additional information
on a particular topic, please get in touch with your local SIPLACE dealer or contact us directly at:
ASM Assembly Systems GmbH&Co.KG
Rupert-Mayer-Str. 44
81379 Munich 1
1.1.5.2 SIPLACE on the World Wide Web (WWW)
We also have our own site on the Internet. Why not log onto our SIPLACE home page at http://
www.asm-smt.com.
1
All the menus and other information are available in two languages: You can choose between the
German and English versions.
The various headings contain information on
– Our products
– Services
– Contacts, etc.
Registered customers can also access the SIPLACE User Group. There you can call up special
information on our placement machines, such as
– Technical documentation
– Technical information
– Spare parts catalogs etc.
Registering for access to the User Group is easy:
Click on ’Register now’.
Complete the registration form and just send it off.
You will then quickly receive access authorization with USER ID and a password.
1.1.6 Abbreviations
1
A-Placement Alternating Placement
PA Placement area
CO Component
C&P20 P2 Collect&Place head with 20 segments, SIPLACE SpeedStar for top placement
performance
1 Introduction Instruction manual SIPLACE SX1/SX2 Edition V2 and V3
1.1 Important notes on the instruction manual From software version SC.713.1 Edition 12/2020
18
CPP Collect&Place head, SIPLACE MultiStar
DCA Direct chip attach
DC Dual conveyor
EDIF Energy and data interface
ESD Electrostatically-sensitive group of components
EMC Electromagnetic compatibility
ESD Electrostatic sensitive device
SC Single conveyor
FC Flip chip
WT Waffle pack tray
WTC Waffle pack tray carrier
GCU Gantry control unit
GND Ground
HCU Head control unit
I-Placement Independent placement
JTF JEDEC Tray Feeder
LBO Long Board Option
PCB Printed circuit board
MCS Machine capability study
MTC Matrix tray changer
P&P Pick&Place
P&P1 Pick&Place module 1
P&P2 Pick&Place module 2
NC Nozzle changer
SMD Surface mounted device
TBO Thick Board Option
SC Station computer
TH Twin Pick&Place head, SIPLACE TwinStar
VHF TH SIPLACE Very High Force TwinStar
VS Vision system
WPC Waffle pack changer
WBO Wide board option (21")