00198661-02_UM_SX12-V3_EN.pdf - 第64页

2 Operational safety Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 2.3 Classification of c amera systems From software version SC.71 3.1 Edition 12/2020 64 2.3 Classification of camera systems 2.3.1 Classification…

100%1 / 366
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 2 Operational safety
From software version SC.713.1 Edition 12/2020 2.2 Warning labels
63
2.2.13.2 Warning label W 004
2
W 004 in fig. 2.2 - 16, page 62, item no. 03223713-01
(quantity: single conveyor 1, dual conveyor 2)
2
LASER RADIATION
Risk class 2
Acc. to IEC 60825-1:2014
Do not look into beam!
2 Operational safety Instruction manual SIPLACE SX1/SX2 Edition V2 and V3
2.3 Classification of camera systems From software version SC.713.1 Edition 12/2020
64
2.3 Classification of camera systems
2.3.1 Classification of the whole machine
2
2.3.1.1 Laser classification
The following modules are assigned to risk class 2:
2
The following modules are assigned to laser class 3B:
2
The ready-for-operation placement machine is assigned to risk class 2.
The risk classes are determined according to IEC 60825-1:2014.
Assembly Data
Component sensor on SpeedStar Maximum optical output power: < 1 mW
Wavelength: 635 nm
Component sensor on MultiStar CPP Maximum optical output power: < 1 mW
Wavelength: 635 nm
Laser light barrier on PCB conveyor Maximum optical output power: < 1 mW
Wavelength: 650 nm
1D board barcode reader
(Datalogic DS1500)
Maximum optical output power: --
Wavelength: 658 nm
Assembly Data
3D coplanarity laser module Maximum optical output power: 60 mW
Wavelength: 670 nm
See also section 6.7
3D coplanarity laser module,
page 322
.
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 2 Operational safety
From software version SC.713.1 Edition 12/2020 2.3 Classification of camera systems
65
2.3.2 Classification of the camera systems
2.3.2.1 Camera types with bright LEDs - risk group 1
The bright LEDs are fitted in the following cameras. These are classified as risk group 1, according
to IEC 62741:.
– Component camera types 30 and 45 for SIPLACE MultiStar (CPP)
– Component camera types 23 and 41 for SIPLACE SpeedStar (C&P20 P)
– Stationary camera types 25 and 33 for SIPLACE MultiStar (CPP) and SIPLACE TwinStar
– PCB camera, type 28
2
2.3.2.2 Camera types with blue LEDs - risk group 2
The ultra-bright blue LEDs are fitted in the following cameras. These are classified as risk group
2, according to IEC 62741:.
– Component camera type 48 for SIPLACE SpeedStar (C&P20 P2)
2
PLEASE NOTE
Risk group 1
Do not look into the beam of the ready-for-operation camera!
2
Risk group 2
The beam from cameras with
ultra-bright blue LEDs can be a haz-
ard.
Do not look into the beam of the ready-for-operation camera!