00198661-02_UM_SX12-V3_EN.pdf - 第20页
1 Introduction Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 1.2 Overview From software version SC.713.1 Edition 12/2020 20 1.2.2 SIPLACE SX1/SX2 V2 The SIPLACE SX1/SX2 V2 features a multi-touch monitor with keybo…
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 1 Introduction
From software version SC.713.1 Edition 12/2020 1.2 Overview
19
1.2 Overview
1.2.1 SIPLACE SX1/SX2 V3
The SIPLACE SX1/SX2 V3 features a multi-touch monitor without keyboard as a default. Instead
of the standard multi-touch monitor, you can configure a 15" LCD monitor with keyboard at each
of the SIPLACE SX1/SX2 V3 operating panels.
1
Fig. 1.2 - 1 SIPLACE SX1/SX2 V3 placement machine
1 Introduction Instruction manual SIPLACE SX1/SX2 Edition V2 and V3
1.2 Overview From software version SC.713.1 Edition 12/2020
20
1.2.2 SIPLACE SX1/SX2 V2
The SIPLACE SX1/SX2 V2 features a multi-touch monitor with keyboard as a default.
1
Fig. 1.2 - 2 SIPLACE SX1/SX2 V2 placement machine
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 1 Introduction
From software version SC.713.1 Edition 12/2020 1.3 Placement machine description
21
1.3 Placement machine description
The SIPLACE SX1 and SX2 placement machines demonstrate
– High precision,
– High configuration flexibility,
– Head and gantry modularity
– Placement performance up to the high end process range and
– A wide ranging component range from 03015 components to a size of
125 mm x 10 mm.
Three placement methods are possible for processing the components:
– Collect&Place,
– Pick&Place and
– A combination of Collect&Place and Pick&Place (mixed mode).
The SIPLACE SX1 placement machine consists of one gantry while the SIPLACE SX2 placement
machine has two gantries. The head and gantry modularity principle developed by SIPLACE al-
lows you to change placement heads and gantries quickly and easily. For an overview of the
placement head configuration, refer to section 1.3.3
from page 25.
These can be quickly and accurately positioned by linear motors, moving independently of one
another in the X and Y directions.
The SX1/SX2 machine supports use of either the SIPLACE single conveyor or the flexible dual
conveyor.
There are two locations available for supplying components. These can be fitted with component
trolleys and configured with up to 60 tracks.
Alternatively, you can also dock a waffle pack changer (WPC5 or WPC6) at each of the two loca-
tions. If a WPC5/WPC6 is set up at one of the locations, a component trolley with 30 tracks must
be configured for the other location.