00198661-02_UM_SX12-V3_EN.pdf - 第141页

Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 3 Technical data and assemblies From software version SC.713.1 Edition 12/2020 3.8 Gantry system 141 3.8.2 Gantry structure 3 Fig. 3.8 - 2 Gantry structure- view of he…

100%1 / 366
3 Technical data and assemblies Instruction manual SIPLACE SX1/SX2 Edition V2 and V3
3.8 Gantry system From software version SC.713.1 Edition 12/2020
140
3.8 Gantry system
3
3.8.1 Gantry positions
3
Fig. 3.8 - 1 Position of gantries in the SX2 placement machines
(1) Gantry 1
(2) Y axis, gantry 1 and gantry 2
(3) Y axis, gantry 1 and gantry 2 (concealed)
(4) Gantry 2
(T) Direction of PCB transport
CAUTION
Always take hold of the handle to push the gantry - only for SIPLACE SX1/SX2 V3
The handle for pushing the gantry is only present on the SIPLACE SX1/SX2 V3. To avoid
damage to the gantry, always use the handle provided to manually move the gantry on the
SIPLACE SX1/SX2 V3. See item (3) in fig. 3.8 - 2
, page 141 or item (4) in fig. 3.8 - 3, page
142
.
(1)
(2)
(4)
(3)
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 3 Technical data and assemblies
From software version SC.713.1 Edition 12/2020 3.8 Gantry system
141
3.8.2 Gantry structure
3
Fig. 3.8 - 2 Gantry structure- view of head mount
(1) Head mount with X axis linear motor (primary part)
(2) Y linear motor 2 with fixed bearing (primary part) and fan
(3) Handle (only for SIPLACE SX1/SX2 V3)
(4) Guidance system with permanent magnet (secondary part of the X linear motor)
(5) Trailing cable
(6) Handle (only for SIPLACE SX1/SX2 V3)
(7) Y linear motor 1 with loose bearing (primary part) and fan
(4)
(3)
(1)
(2)
(6)
(5)
3 Technical data and assemblies Instruction manual SIPLACE SX1/SX2 Edition V2 and V3
3.8 Gantry system From software version SC.713.1 Edition 12/2020
142
3
Fig. 3.8 - 3 Design of X axis - view of head mount
(1) Y linear motor 1 with loose bearing (primary part) and fan
(2) Head board with Head Control Unit
(3) Y linear motor 2 with loose bearing (primary part) and fan
(4) Handle (only for SIPLACE SX1/SX2 V3)
(5) X axis linear motor (primary part)
(6) Gantry interface X axis (under the cover)
(7) Gantry interface Y axis (under the cover)
(8) Sensor module
(2)
(1)
(4)
(5)
(6)
(8)
(7)
(3)