00198661-02_UM_SX12-V3_EN.pdf - 第300页

6 Station extensions Instructio n manual SIPLACE SX1/SX2 Edition V2 and V3 6.1 Nozzle changer From software version SC.713.1 Edition 12/2020 300 6  Place the magazine on the snap fa stener balls (item 5 in fig. 6.1 - 7 …

100%1 / 366
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 6 Station extensions
From software version SC.713.1 Edition 12/2020 6.1 Nozzle changer
299
6
6
Fig. 6.1 - 7 Nozzle changer for the C&P/CPP - changing the magazine
(1) Lever for raising the magazine
(2) Parallel pin, engages in the hole in the magazine
(3) spring pin for triggering the microswitch
(4) Pin of the slide mechanism, moves the locking plate
(5) Ball of snap fastener
(6) Parallel pin, engages in the slot in the magazine
(7) Locking plate in the "magazine locked" position
WARNING
Risk of head crashes with protruding lever
Any lever that is protruding over the magazine (item 1 in fig 6.1 - 7) can result in a head
crash.
You should therefore make sure that the lever does not protrude over the maga-
zines.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
6 Station extensions Instruction manual SIPLACE SX1/SX2 Edition V2 and V3
6.1 Nozzle changer From software version SC.713.1 Edition 12/2020
300
6
Place the magazine on the snap fastener balls (item 5 in fig. 6.1 - 7, page 299).
Press the magazine down evenly so that the snap fastener balls engage in all the snap fas-
teners at the same time.
6.1.3.3 Position detection
Each nozzle changer magazine has two fiducials for determining the position.
6
Fig. 6.1 - 8 Nozzle magazine - holder numbering, fiducials for determining the position and angular position
(1) Locking plate in the "magazine open" position
(2) Fiducial for determining the position
PLEASE NOTE
6
Move the locking plate into the "Magazine locked" position.
Before inserting, align the magazine so that the centering pins (items 2 and 6 in fig.
6.1 - 7
, page 299) slide into the centering holes and slot.
(1)
(2)
(2)
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 6 Station extensions
From software version SC.713.1 Edition 12/2020 6.1 Nozzle changer
301
6.1.3.4 Nozzle changer "row 2" for the SIPLACE MultiStar
Item no. 00519842-xx Nozzle changer CPP for row 2 , SX
The "row 2" nozzle changer may be installed at the following locations:
SX placement machine: Locations 1 and 2
The retrofit package contains an assembly kit.
6
Fig. 6.1 - 9 Assembly kit for the "row 2" nozzle changer