00198661-02_UM_SX12-V3_EN.pdf - 第335页

Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 6 Station e xtensi ons From software version SC.713.1 Edition 12/2020 6.15 Smart Pin Sup port 335 6 Fig. 6.15 - 2 Gripper unit for Smart Pin Support The gripper unit i…

100%1 / 366
6 Station extensions Instruction manual SIPLACE SX1/SX2 Edition V2 and V3
6.15 Smart Pin Support From software version SC.713.1 Edition 12/2020
334
6.15 Smart Pin Support
Item no. 03089621-xx Smart Pin Support
Item no. 03087404-xx Magazine SPS L10 assembly
Item no. 03087508-xx Magazine SPS Q10 assembly
Wide boards tend to deflect during placement such that, under certain circumstances, the compo-
nents can no longer be placed with the desired accuracy. Highly curved PCBs also affect the
placement accuracy. This problem can be easily rectified by fitting support pins on the lifting table.
6
Fig. 6.15 - 1 Support pin
The support pins are automatically placed on the lifting table with the help of the Smart Pin Sup-
port
option. A gripper unit is used to pick the support pins up from special magazines and place
them in the prescribed positions.
6
PLEASE NOTE
For a detailed description, see the "Smart Pin Support User Guide", German+English
[item no. 00197001-xx]
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 6 Station extensions
From software version SC.713.1 Edition 12/2020 6.15 Smart Pin Support
335
6
Fig. 6.15 - 2 Gripper unit for Smart Pin Support
The gripper unit is fitted to the gantry. This gripper unit picks the support pins up from the pre-
scribed magazine and positions them on the lifting table. The positions of the support pins in the
placement machine can be defined for each board side, in the SIPLACE Pro Board Editor.
There are two different magazines available for automatic changeover of max. 10 support pins in
the various machine configurations. These magazines are fixed to a magazine holder and are fit-
ted to the component trolley COT insert.
– Smart Pin Support - magazine type Q10 [item no. 03087404-xx]
– Smart Pin Support - magazine type L10 [item no. 03087508-xx]
6 Station extensions Instruction manual SIPLACE SX1/SX2 Edition V2 and V3
6.15 Smart Pin Support From software version SC.713.1 Edition 12/2020
336
6
Fig. 6.15 - 3 Smart Pin Support - magazine type Q10
6
Fig. 6.15 - 4 Smart Pin Support - magazine type L10