00198661-02_UM_SX12-V3_EN.pdf - 第134页

3 Technical data and assemblies I nstruction manual SIPLACE SX1/S X2 Edition V2 and V3 3.7 Placement head From software version SC.713.1 Edition 12/2020 134 3.7.5.6 SIPLACE MultiSt ar CPP in mixed mode with complete rot …

100%1 / 366
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 3 Technical data and assemblies
From software version SC.713.1 Edition 12/2020 3.7 Placement head
133
3.7.5.5 SIPLACE MultiStar CPP in Collect&Place mode
The SIPLACE MultiStar CPP processes small components in this mode.
3
Fig. 3.7 - 8 SIPLACE MultiStar CPP- Collect&Place mode
K_BE Small component (see table 3.7 - 1, page 131)
Type 30 Component camera, type 30
1 ... 12 Order of components taken up
3
Type 30
K_BE
3 Technical data and assemblies Instruction manual SIPLACE SX1/SX2 Edition V2 and V3
3.7 Placement head From software version SC.713.1 Edition 12/2020
134
3.7.5.6 SIPLACE MultiStar CPP in mixed mode with complete rotation
The MultiStar processes small to medium sized components in this mode.
3
Fig. 3.7 - 9 SIPLACE MultiStar CPP - mixed mode
K_BE Small component (see table 3.7 - 1, page 131)
M_BE_1 Medium sized component, type 1 (see table 3.7 - 1
, page 131)
M_BE_2 Medium sized component, type 2 (see table 3.7 - 1
, page 131)
Type 30 Component camera, type 30
Type 33 Stationary component camera, type 33
1 ... 8 Order of components taken up
1 ... 12 Order of components taken up
3
Neighboring segments of the SIPLACE MultiStar CPP head are not able to take up components
of type M_BE_2 if the diagonal length of the medium sized component, type 2 (M_BE_2) is longer
than 39.8 mm.
Type 30 Type 30
Type 33 Type 33
K_BE
M_BE_2
M_BE_1
K_BE
Instruction manual SIPLACE SX1/SX2 Edition V2 and V3 3 Technical data and assemblies
From software version SC.713.1 Edition 12/2020 3.7 Placement head
135
3.7.5.7 SIPLACE MultiStar CPP in advanced Pick&Place mode
In advanced Pick&Place mode with limited rotation, the SIPLACE MultiStar CPP can place the en-
tire component spectrum from 01005 to 50 mm x 40 mm. The large components are picked up
last, optically centered and then placed as first components.
3
Fig. 3.7 - 10 SIPLACE MultiStar CPP - mixed mode
K_BE Small component (see table 3.7 - 1, page 131)
M_BE_2 Medium sized component, type 2 (see table 3.7 - 1
, page 131)
G_BE Large component (see table 3.7 - 1
, page 131)
Type 30 Component camera, type 30
Type 33 Stationary component camera, type 33
1 ... 8 Order of components taken up
3
Neighboring segments of the SIPLACE MultiStar CPP head are not able to take up components
of types M_BE_2 and G_BE if the diagonal length of these components is longer than 39.8 mm.
Type 30
K_BE
G_BE
Type 33
M_BE_2