2OM-1104-001.pdf - 第129页

Squeegee-Screen : Enter an offset value in the text box, based on the specified distance in the Y direction between the squeegee ori- gin and the screen center . Fig. 3D13-5 V acuum Plate : Enter an offset value in the t…

*3 Offset Entry Area for Each Unit

Offset values can be entered for each unit.

Camera Stopper : When the P.C.B. stop position has de-

viated from the table center, set the

offset data for the correction.

Fig. 3D13-3

The offset can automatically be

set through the teaching op-

eration.

Screen Distance : Enter an offset value in the text box,

based on the specified distance in the

Z direction between the underside of

the screen and the upper surface of the

P.C.B. for printing.

Fig. 3D13-4

0106-003 Chapter 1 4 22 AFU01EDTP

4.1

Machine Offset

Tab

Squeegee-Screen : Enter an offset value in the text box,

based on the specified distance in the

Y direction between the squeegee ori-

gin and the screen center.

Fig. 3D13-5

Vacuum Plate : Enter an offset value in the text box,

based on the specified distance in the

X direction between the center of the

P.E.C. recognition camera and the end

plane of the P.C.B. vacuum jig.

Fig. 3D13-6

0106-003 Chapter 1 4 23 AFU01EDTP

4.1

Machine Offset

Tab

P.C.B. Transfer Height : Enter an offset value in the text

box, based on the specified distance

in the Z direction between the upper

surface of the table chute at its origin

and the lower surface of the P.C.B.

Fig. 3D13-7

Cleaning : Enter an offset value in the text box,

based on the specified distance in the

X direction between the cleaning head

at its cleaning position and the screen

center.

Fig. 3D13-8

P.C.B. Chuck Height : Enter an offset value in the text box,

based on the specified distance in the

Z direction between the P.C.B. backup

table at its origin and the lower surface

of the P.C.B.

Fig. 3D13-9

0106-003 Chapter 1 4 24 AFU01EDTP

4.1

Machine Offset

Tab