2OM-1104-001.pdf - 第258页

Fig. 5A23 T able Section Fig. 5A23-1 8. Half-Y early Maintenance 0106-003 Chapter 3 1 22 AFU01EINP X-Axis Ball Screw (1) Move the table Z axis up to the printing position. (2) Detach the cover located at the front side o…

100%1 / 387
8. Half-Yearly Maintenance
Table 5A9
Maintenance Spots
Description
Grease
Cleaning
Check
Tools,
Name
DWG
Nozzles,
No.
etc.
Squeegee Squeegee Head 5A30 Lubrication DE1 Brush,
Head Section Y-Axis Ball Screw Spatula
Squeegee Head 5A30 Lubrication DE1 Grease Gun
Y-Axis Linear Guide
Screen Recognition 5A32 Lubrication DE1 Brush,
X-Axis Ball Screw Spatula
Screen Recognition 5A32 Lubrication DE1 Grease Gun
X-Axis Linear Guide
Guide Bushing for 5A31 Lubrication DE1 Brush,
Squeegees Up/Down Spatula
Movement
Screen Holder Y-Axis Ball Screw 5A33 Lubrication DE1 Brush
Section Y-Axis Linear Guide 5A34 Lubrication DE1 Brush
L Conveyor Spline Shaft for 5A35 Lubrication DE1 Brush,
Section Width Adjustment Spatula
Ball Screw for Width 5A35 Lubrication DE1 Brush,
Adjustment Spatula
Guide Bushing for 5A35 Lubrication DE1 Brush,
Width Adjustment
Spatula
R Conveyor Spline Shaft for 5A36 Lubrication DE1 Brush,
Section Width Adjustment Spatula
Ball Screw for 5A36 Lubrication DE1 Brush,
Width Adjustment Spatula
Guide Bushing for 5A36 Lubrication DE1 Brush,
Width Adjustment Spatula
Cover Section Front Safety Door 5A36 Lubrication DE1 Brush
Gas Damper (Upper) -1
Front Safety Door 5A36 Lubrication DE1 Brush
Gas Damper (Lower) -2
Rear Safety Door 5A36 Lubrication DE1 Brush
Gas Damper (Upper) -3
Rear Safety Door 5A36 Lubrication DE1 Brush
Gas Damper (Lower) -4
0106-003 Chapter 3 1 21 AFU01EINP
Fig. 5A23 Table Section
Fig. 5A23-1
8. Half-Yearly Maintenance
0106-003 Chapter 3 1 22 AFU01EINP
X-Axis Ball Screw
(1) Move the table Z axis up
to the printing position.
(2) Detach the cover located
at the front side of the
table.
(3) Apply grease with a brush
or a spatula.
Lubrication
X-Axis Linear Guide
Front Side: Apply grease
with a brush.
Rear Side: Apply grease
with a grease gun.
Lubrication
-Axis Ball Screw
Apply grease with a brush or
a spatula.
Lubrication
-Axis Linear Guide
Apply grease to the grease
nipple with a grease gun.
Lubrication
Fig. 5A24 Table Section
Fig. 5A25 Table Section
8. Half-Yearly Maintenance
0106-003 Chapter 3 1 23 AFU01EINP
Z-Axis Ball Screw
(1) Move the table Z axis up
to the printing position.
(2) Detach the cover located
at the front side of the table.
(3) Apply grease with a brush
or a spatula.
Lubrication
Z-Axis Guide Bushing
(1) Move the table Z axis up
to the printing position.
(2) Detach the cover located
at the front side of the table.
(3) Apply grease with a brush
or a spatula.
Lubrication