2OM-1104-001.pdf - 第224页
Error ID Item Description 2102000 Operator's Error P .C.B. was took on inp. conveyor . (Cause 1) Although a manual operation cannot be implemented with a P .C.B. on the input conveyor , such an operation was perform…
Error ID Item Description
2005000 Cleaning Cleaning nozzle up/down cylinder moving error
(Cause 1) The cleaning nozzle was moved up when the P.C.B. recognition Y axis was
not located at its front escape position (origin position).
(during the manual operation)
(Cause 2) The P.C.B. recognition Y-axis near origin sensor (BPH331) is defective.
(Cause 3) The operation timing is shifted from the normal one.
(Remedy 1) Zero the P.C.B. recognition Y axis and re-start the operation.
(Remedy 2) Zero the P.C.B. recognition Y axis.
When the P.C.B. recognition Y axis cannot be zeroed, it is required to
replace the sensor with a new one. Contact our service personnel for
details.
(Remedy 3) Shut down the power of the machine once and power up the machine
again. After that, restart the operation.
When the same error still occurs, contact our service personnel for de-
tails.
2006000 Cleaning Cleaning paper feed error
(Cause 1) The paper feeder pitch detection sensor (BPH082) is not working.
(Cause 2) The inside of the cleaning paper roller is torn, making the rotation of the
paper cylinder idle.
(Cause 3) The belt of the take-up motor is not engaged correctly (some teeth not mesh-
ing with the belt).
(Remedy 1) Check for any dirt around the sensor and how the sensor is working in
the "DEVICE CHECK" window (submenu).
When the sensor is not working, it is required to adjust the sensor posi-
tion or replace the sensor with a new one.
Contact our service personnel for details.
(Remedy 2) Check the internal condition of the paper roller. If some area is torn, re-
place it with another one.
(Remedy 3) When you hear the sounds, indicating that some teeth do not mesh cor-
rectly with the belt during the take-up operation, it is required to adjust the
belt tension.
Contact our service personnel for details.
2.3 Error IDs and Remedial Procedures
0106-001 Chapter 2 2 68 AFU01ETRP
Error ID Item Description
2102000 Operator's Error P.C.B. was took on inp. conveyor.
(Cause 1) Although a manual operation cannot be implemented with a P.C.B. on the
input conveyor, such an operation was performed with a P.C.B.
(Remedy 1) Remove the P.C.B. on the input conveyor and re-start the operation.
2103000 Operator's Error P.C.B. removed from input conveyor.
(Cause 1) Although a manual operation cannot be implemented without a P.C.B. on
the input conveyor, such an operation was performed without a P.C.B.
(Remedy 1) Place a P.C.B. on an area of the input conveyor where the sensor reacts.
2105000 Operator's Error Vacuum plate was not found.
(Cause 1) The automatic or the manual operation was performed without any pattern
program specified as a current one.
(Remedy 1) Perform a program change operation.
2106000 Operator's Error P.C.B. was took on table.
(Cause 1) Although a manual operation cannot be implemented with a P.C.B. on the
table, such an operation was performed with a P.C.B.
(Remedy 1) Remove the P.C.B. on the table and re-start the operation.
Click the table section (illustrated) in the "AUTO OPN." window to re-
move the P.C.B. from the memory of the machine whenever necessary.
2107000 Operator's Error P.C.B. removed from table.
(Cause 1) Although a manual operation cannot be implemented without a P.C.B. on
the table, such an operation was performed without a P.C.B.
(Remedy 1) Place a P.C.B. on the table and re-start the operation.
Click the table section (illustrated) in the "AUTO OPN." window to set the
P.C.B. in the memory of the machine whenever necessary.
2.3 Error IDs and Remedial Procedures
0106-001 Chapter 2 2 69 AFU01ETRP
Error ID Item Description
2108000 Operator's Error P.C.B. was took on output conveyor.
(Cause 1) Although a manual operation cannot be implemented with a P.C.B. on the
output conveyor, such an operation was performed with a P.C.B.
(Remedy 1) Remove the P.C.B. on the output conveyor and re-start the operation.
2109000 Operator's Error P.C.B. removed from output conveyor.
(Cause 1) Although a manual operation cannot be implemented without a P.C.B. on
the output conveyor, such an operation was performed without a P.C.B.
(Remedy 1) Place a P.C.B. on an area of the output conveyor where the sensor re-
acts.
2113000 Operator's Error Vacuum cleaning can not use in vacuum plate chuck on.
(Cause 1) The operation timing is shifted from the normal one.
(Cause 2) A cleaning suction operation was performed during the vacuum cleaning
(chuck suction). (during the manual operation)
(Remedy 1) Shut down the power of the machine once and power up the machine
again. After that, restart the operation.
When the same error still occurs, contact our service personnel for de-
tails.
(Remedy 2) Cancel the chuck suction operation through manual operation and re-
start the operation.
2114000 Operator's Error Vacuum plate can not use at vacuum cleaning on.
(Cause 1) The operation timing is shifted from the normal one.
(Cause 2) A chuck suction operation was performed during the vacuum cleaning (chuck
suction). (during the manual operation)
(Remedy 1) Shut down the power of the machine once and power up the machine
again. After that, restart the operation.
When the same error still occurs, contact our service personnel for de-
tails.
(Remedy 2) Cancel the cleaning suction operation through manual operation and re-
start the operation.
2.3 Error IDs and Remedial Procedures
0106-001 Chapter 2 2 70 AFU01ETRP