2OM-1104-001.pdf - 第81页
2.1 "Product" T ab Displayed is the data that represents the actual production rate of the machine. • Sheet Layout When the "Product" tab is pressed in the "MANAGE. DA T A 1" window (submenu…
Table 3C1
Tabs Description
Product This indicates the data that represents the actual production rate of
the machine.
Time Data This indicates the data that represents the cumulative periods of
running time for each operation mode.
Recog. Error This indicates the data related to the recognition errors.
Sub-System Error This indicates the error data on each individual units.
Info. Clear This tab sheet is provided with two buttons and each button is used
to clear the management data stored in memory.
0004-001 Chapter 1 3 5 AFU01EDTP
2.
"
MANAGE. DATA 1
"
Submenu
2.1 "Product" Tab
Displayed is the data that represents the actual production rate of the
machine.
• Sheet Layout
When the "Product" tab is pressed in the "MANAGE. DATA 1" window
(submenu), the following tab sheet appears.
Fig. 3C4 "Product" Tab Sheet
• Sheet Composition
*1 PCB Counter
This indicates the number of produced P.C.B.’s in "PRINT" mode
(operation mode).
The system counts the number of times the table was zeroed after
the end of each printing and the result is regarded as the number
of produced P.C.B.’s.
*2 Passed PCB
This indicates the number of P.C.B.’s that have been transferred
without being printed in the "PASS" mode (operation mode).
The system counts the number of times the P.C.B.’s were trans-
ferred from the table to the R conveyor and the result is regarded
as the number of passed P.C.B.’s.
0004-001 Chapter 1 3 6 AFU01EDTP
2.1
"
Product
"
Tab
*1
*2
*3
*4
*5
*6
*7
*3 Maint. Stop Total Count
This indicates the number of times the machine was stopped for
maintenance operations (described below in *4 through *7).
The indicated value is the total of *4 through *7.
*4 Hand Cleaning Stop Count
This indicates the number of times the machine was stopped for
manual cleaning operations.
*5 Solvent Shortage Stop Count
This indicates the total number of times the machine was stopped
because it was detected that only a little amount of cleaning sol-
vent remained.
*6 Paper Shortage Stop Count
This indicates the total number of times the machine was stopped
because it was detected that the machine became empty of clean-
ing paper.
*7 Paste Shortage Stop Count
This indicates the total number of times the machine was stopped
because the number of P.C.B.’s (Paste Empty Stop (PCB)) reached
the specified value.
When the paste remainder detection sensor (option) is
used, it detects that paste is consumed up and the num-
ber of times by which the machine has stopped is also
added.
0106-003 Chapter 1 3 7 AFU01EDTP
2.1
"
Product
"
Tab