2OM-1104-001.pdf - 第232页
Section 1 Periodic Maintenance 0004-001 Chpter 3 1 1 AFU01EINP This section describes how to maintain the machine pe- riodically .
0004-001 Chapter 3 2 AFU01EINP
Section 1
Periodic Maintenance
0004-001 Chpter 3 1 1 AFU01EINP
This section describes how to maintain the machine pe-
riodically.
1. Precautionary Items before Maintenance
Periodic lubrication, inspections, and cleaning work should be performed
for precise machine operations.
It is recommended that lubrication, inspections, and cleaning work be
performed periodically.
• Only qualified personnel should perform lubri-
cation, inspections, and cleaning work carefully
in compliance with the specified procedures.
• Before performing maintenance work, turn off
the power and air sources and lock the power
breaker using the padlock.
Refer to "2.4 Precautionary Measures before
Maintenance Work" in "Safety Precautions" for
details.
• After cleaning with a rag, be sure to remove the waste thread com-
pletely. Otherwise, the machine will break down.
• Wipe off old grease before lubrication. Otherwise, the effect of grease
will decrease.
• When air is used for cleaning, do not blow air to any spots other than
the specified ones.
If dispersed dirt and dust adhere to various sensors, ball screws,
linear guides, etc., the machine will break down.
1. Precautionary Items before Maintenance
0004-001 Chapter 3 1 2 AFU01EINP
CAUTION