2OM-1104-001.pdf - 第282页
(10) Mount the supply roller by turning the knob counterclockwise while supporting the new supply roller such that the notch of the left adapter is engaged with the pin of the left flange on the cleaning unit. Fig. 5A47 …
(8) Attach the adapters to both ends of the new supply roller shaft.
Press-fit the left adapter to the roller shaft so that the end of the
shaft is held in close contact with the ring of the left adapter.
Fig. 5A45
Select the correct adapters for both ends of the shaft.
The left adapter is provided with a screw but the right one
is not.
(9) Adjust the spacers in accordance with the width of the paper to be
used.
Fig. 5A46
(a) To change the paper width (350 mm) to "280 mm",
attach the right and left spacers.
(b) To change the paper width (280 mm) to "350 mm",
detach the right and left spacers.
12. Replacement of Cleaning Paper (How to change the cleaning paper width)
0009-002 Chapter 3 1 37 AFU01EINP
Roller Shaft
Ring
Left Adapter
Right Adapter
Left Spacers
M4 30 2 pcs.
Right Spacers
M4 45 2 pcs.
(10) Mount the supply roller by turning the knob counterclockwise while
supporting the new supply roller such that the notch of the left
adapter is engaged with the pin of the left flange on the cleaning
unit.
Fig. 5A47
Mount the roller while tilting the right side up because the
right adapter easily falls off from the roller shaft.
(11) Insert the end of the cleaning paper and follow the steps *1 through
*4 to thread it.
Fig. 5A48
Note the rolling direction of the paper.
12. Replacement of Cleaning Paper (How to change the cleaning paper width)
0009-002 Chapter 3 1 38 AFU01EINP
Knob
Paper End
(12) Mount the take-up roller by turning the knob counterclockwise while
supporting the take-up roller such that the notch of the left adapter
is engaged with the pin of the left flange on the cleaning unit.
Fig. 5A49
Mount the take-up roller while tilting the right side up be-
cause the right adapter easily falls off from the roller shaft.
(13) Fasten the paper end securely to the take-up roller shaft with a
gummed cloth tape, etc.
Fig. 5A50
Fasten the paper such that the edges become perpen-
dicular to the roller shaft to equalize the uneven pull of the
paper (to avoid forming a spiral pattern).
0009-002 Chapter 3 1 39 AFU01EINP
12. Replacement of Cleaning Paper (How to change the cleaning paper width)
Roller Shaft
Gummed Cloth Tape, etc.
Paper Edge