2OM-1104-001.pdf - 第243页
Camera (Lens) Remove dirt and dust with a vacuum cleaner . Cleaning Glass Surface of P .C.B. Recognition Lighting Remove dirt and dust with a vacuum cleaner . Cleaning 0009-001 Chapter 3 1 10-1 AFU01EINP 4. Daily Mainten…
Upper Surface of Screen
Holder
Cleaning
Remove dirt on the upper
surface and side face with
a rag if any.
Screen Printing Patterns
Cleaning
After using the screen, use
industrial alcohol (solvent)
and the ultrasonic cleaner
to clean the screen such
that the mesh (pores) of the
screen (screen patterns) is
not clogged.
Lower Surface of Screen
Cleaning
Clean the screen bottom
with a rag soaked in indus-
trial alcohol (solvent).
0009-002 Chapter 3 1 10 AFU01EINP
Fig. 5A7 Screen Holder Section
Fig. 5A8 L/R Conveyor Section
Upper Surface of P.C.B.
Transfer Belt
Cleaning
Remove solder paste and
dust with a vacuum cleaner.
4. Daily Maintenance
Camera (Lens)
Remove dirt and dust with a
vacuum cleaner.
Cleaning
Glass Surface of P.C.B.
Recognition Lighting
Remove dirt and dust with a
vacuum cleaner.
Cleaning
0009-001 Chapter 3 1 10-1 AFU01EINP
4. Daily Maintenance
Fig. 5A8-1
5. Weekly Maintenance
DE1: DAPHNE EPONEX GREASE No. 1
Table 5A5
Maintenance Spots
Description
Grease
Cleaning
Check
Tools,
Name
DWG
Nozzles,
No. etc.
P.C.B. Chuck Upper Surface of 5A9 Cleaning - Vacuum
Section Backup Table and Cleaner
Pin Hole Section
P.E.C. P.C.B. Stopper 5A10 Cleaning DE1 Oiled Rag
Recognition P.C.G. Warpage 5A10 Cleaning Rag
Section Top Holder
(Outer Circumfe-
rence of Roller)
Air Source Drain 5A11 Cleaning Container,
etc.
L Conveyor Interlock
5A11-1
Cleaning - Vacuum
Section Cleaner
R Conveyor Interlock
5A11-2
Cleaning - Vacuum
Section Cleaner
Blower Filter
5A11-3
Cleaning - Air and
Vacuum
Cleaner
Fig. 5A9 P.C.B. Chuck Section
0106-003 Chapter 3 1 11 AFU01EINP
Upper Surface of Backup
Table and Pin Hole Section
Remove solder paste and
dust with a vacuum cleaner.
Cleaning
5. Weekly Maintenance