2OM-1104-001.pdf - 第43页

(6) Paste Detect (Option) Set the number of P .C.B.’s to be produced by the time when the subsequent detection is made after the amount of remaining sol- der paste is once detected. When "0" is set, this functi…

1.2.8 Auto Stop

(1) Hand Cleaning Stop (PCB)

Set the number of P.C.B.’s to be produced before the machine is

automatically stopped for manual cleaning operation.

When "00" is set, this function becomes invalid.

Unit: pieces

Data Input Range: 0 to 99

(2) Hand Cleaning Stop (CLNG.)

Set the number of cleaning operations to be performed before the

machine is automatically stopped for manual cleaning operation.

When "00" is set, this function becomes invalid.

Unit: counts

Data Input Range: 0 to 99

(3) Solv. Empty Stop (CLNG.)

Set the number of P.C.B.’s to be produced before the machine is

automatically stopped to replenish solvent for screen frame clean-

ing.

When "00" is set, this function becomes invalid.

Unit: pieces

Data Input Range: 0 to 99

(4) Paste Supply Interval Mode

Select a criteria based on which the machine should be automati-

cally stopped for solder paste replenishment (related to "(5) Paste

Empty Stop (PCB)").

Paste Detect : The machine stops automatically according to the

detected amount of remaining paste.

Print PCB : The machine stops automatically according to the

number of paste-printed P.C.B.’s.

(5) Paste Empty Stop (PCB)

Set the number of P.C.B.’s to be produced before the machine is

automatically stopped for solder paste replenishment.

When "000" is set, this function becomes invalid.

Unit: pieces

Data Input Range: 0 to 999

Paste Supply Interval Mode

Print PCB

Fig.3B59

0106-003 Chapter 1 2 19 AFU01EDTP

1.2 Operation Data

Paste Empty Stop (PCB)

000

Fig.3B60

Solv. Empty Stop (CLNG.)

Fig.3B58

Hand Cleaning Stop (CLNG.)

Fig.3B57

Hand Cleaning Stop (PCB)

Fig.3B56

(6) Paste Detect (Option)

Set the number of P.C.B.’s to be produced by the time when the

subsequent detection is made after the amount of remaining sol-

der paste is once detected.

When "0" is set, this function becomes invalid.

Unit: pieces

Data Input Range: 0 to 99

This parameter becomes valid only when "Paste Detect"

is selected in the "Paste Supply Interval Mode" text box

(described in (4)).

Paste Detect (Option)

Fig.3B61

0106-003 Chapter 1 2 20 AFU01EDTP

1.2 Operation Data

1.2.9 Cleaning

(1) Cleaning Area

Set offset values as a cleaning area based on the end plane of the

P.C.B. in the Y direction.

Unit: mm

The default values are "-010 mm" for "Origin" and "000

mm" for "Depth". A wide area will be cleaned in both di-

rections (10 mm on one side) based on the Y direction of

the P.C.B.

(2) Cleaning Interval

Set the number of P.C.B.’s to be printed as a cycle for automatic

cleaning.

Every time the number of printed P.C.B.’s reaches the specified

one (cycle), the machine automatically performs a cleaning op-

eration once.

(3) Cleaning Mode

Select a mode in which the underside of the screen should be

cleaned automatically.

Standard Mode : The underside is cleaned in the “Stan-

dard Mode”.

Option Mode : The underside is cleaned in the “Option

Mode”.

(4) Standard Mode

One of the following options can be selected as a pattern of wiping

order.

V+D

D D D

V+W

V+W V+D V+D

V+W

V+W D D

W D D

V+D

V+D V+D V+D

Wiping Modes:

W:Solvent is discharged and the underside of the screen is

wiped with wet paper.

D:Solvent is not discharged and the underside of the screen

is wiped with dry paper.

V+W : Solvent is discharged and the underside of the screen is

wiped with wet paper while the paper is being sucked.

V+D : Solvent is not discharged and the underside of the screen

is wiped with dry paper while the paper is being sucked.

Cleaning Interval

Fig.3B63

Origin

Depth

-010

+010

Fig.3B62

Cleaning Mode

Option Mode

Fig.3B64

Standard Mode

V+W V+W V+D V+D

Fig.3B65

0106-003 Chapter 1 2 21 AFU01EDTP

1.2 Operation Data