CAN Bus Workshop_Version 03__06-2008_EN.pdf - 第107页

CACCIA Manual 1 Caccia Student Guide Issue 04/2007 EN 15 T ab. 1 - 2 Subsystem Control Center dialog box buttons Get V ersions Starts a version informatio n query for all subsystems. The subsystems found will be opened. …

1 Caccia Student Guide CACCIA Manual

Issue 04/2007 EN

1.2 Basic Functions

1.2.1 Opening the Subsystem Control Center

→ Click on the button to open the Subsystem Control Center dialog box:

Fig. 1 - 7 Subsystem Control Center dialog box

Button Description / Action

Collapse All Closes the open tree structure completely.

Clear All Disables the subsystems currently active.

Log to File

Saves the structure of the configured machine, including

all subsystems, as a text file.

CACCIA Manual 1 Caccia Student Guide

Issue 04/2007 EN

Tab. 1 - 2 Subsystem Control Center dialog box buttons

Get Versions

Starts a version information query for all subsystems.

The subsystems found will be opened.

– Green: At least one BIOS message has been sent.

– Red: No subsystem message or an error has oc-

curred The errors are listed in a separate window.

Any subsystems which have not been applied in X-

Series feeders will be marked red.

If the tree structure does not open when you click on the

Get Version button, the error lies in the connection, in

the machine configuration or in a version of Caccia

which is too old (lower than 14.0.75). 1

Another possible error source is when the MC has not

yet been booted. In this case, you need to assign the

IDs for the individual nodes. Simply click on the Acti-

vate IDs button and this will be performed automatically.1

Get States

Reports the state of each subsystem,

(make sure you click on Get Versions beforehand.).

Activate IDs

Assigns a CAN ID for each subsystem, if the machine

controller has not been started.

n Download

Starts a multiple download to the subsystems. The se-

lected subsystems need to be compatible, otherwise an

error message will be issued.

Synchronize Machine

Data

Enables the developer to perform machine data or MA

database downloads at the station.

Main Axis Reference

Run

Enables the developer to perform multiple gantry axis

reference runs.

Set Software Enable Enables the software release.

Error Trigger

Enables you to trigger the MC error messages (certain

HW requirements necessary). 1

Button Description / Action

1 Caccia Student Guide CACCIA Manual

Issue 04/2007 EN

1.2.2 CAN IDs

The CAN IDs can be viewed in the Subsystem Control Center. 1

→ To start the Subsystem Control Center, click on the button:

Fig. 1 - 8 Subsystem Control Center: CAN IDs

CAN IDs

Enables the software.

If the MC is unable to start or if it is blocked

by an empty diskette, Caccia can perform a

machine type-specific CAN ID assignment